[Bldg-sim] LEED simulation in energy plus

[冷面寒枪]

Hi,

it seems that idf files can be import to designbuilder.You can develope geometry model in openstudio and export idf file,then import the idf file into Designbuilder.




hope this help!

Yongqingzhao







------------------
赵永青
 长沙绿建节能科技有限公司
长沙市韶山中路438号 
电话:13574805636
 Email:zhaoyongqing1987 at 126.com
          503271081 at qq.com 







------------------ Original ------------------
From:  "Karol Bandurski";<karol.bandurski at put.poznan.pl>;
Date:  Tue, Dec 15, 2015 04:57 AM
To:  "bldg-sim"<bldg-sim at lists.onebuilding.org>; 

Subject:  [Bldg-sim] LEED simulation in energy plus



Dear Modelers,

I am going to do calculation for LEED (EA P2 and EA C1) using EnergyPlus. I
am new in this software, but I get license for DesignBuilder.

Could you write me what is difference (difficulty level, future
possibilities) between building modeling in OpenStudio and  DesignBuilder?
I mean: is it easier to draw in OpenStudio, but e.g. HVAC development is
nicer in DesignBuilder...?

Could I model building in OpenStudio (envelope), but later work on it in
DesignBuilder (and vice versa)?

Thanks in advance for your hints and tips!!!
Regards,
Karol Bandurski
------------------------------------------------
Karol Bandurski MSc.
Institute of Environmental Engineering
Poznan University of Technology
www.put.poznan.pl/~karol.bandurski
www.ee.put.poznan.pl




_______________________________________________
Bldg-sim mailing list
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
To unsubscribe from this mailing list send  a blank message to BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20151215/43aa76c8/attachment-0001.html>