[Bldg-sim] Revit, Ecotect and EnergyPlus

[Jackson, Alan]

Shariq,

Leticia,

 

See example below

 

http://openrevit.com/2009/12/export-revit-to-energyplus-via-ecotect/

 

Alan Jackson, LEED AP

KlingStubbins

 

From: bldg-sim-bounces at lists.onebuilding.org
[mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of
Shariq_Ali at URSCorp.com
Sent: Wednesday, August 25, 2010 3:07 PM
To: bldg-sim at lists.onebuilding.org
Subject: Re: [Bldg-sim] Revit, Ecotect and EnergyPlus

 

It is technically possible. I have never done it on an active project. I
suspect it would be beneficial on a large scale project with someone who
knows what they're doing in all three programs. I wrote a paper on the
transfer process from Revit - gbXML - Trane Trace (RGT). It is attached.
I'm sure there are many similarities with the Revit - Ecotect - E+
process as with the RGT process. 

I also included my presentation at SimBuild.

(See attached file: p+_ALI_+v3.pdf)(See attached file: 2010-08-09 IBPSA
Presentation.pps)

Regards,
Shariq

Shariq Ali EIT, LEED AP BD+C
Mechanical Engineer
URS Corporation
1375 Euclid Ave. Suite 600
Cleveland, OH 44115
Direct: 216.622.2276
Fax: 216.622.2428

This e-mail and any attachments contain URS Corporation confidential
information that may be proprietary or privileged. If you receive this
message in error or are not the intended recipient, you should not
retain, distribute, disclose or use any of this information and you
should destroy the e-mail and any attachments or copies.

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20100831/733620b8/attachment.htm>