[Bldg-sim] Revit, Ecotect and EnergyPlus

[Shariq_Ali at URSCorp.com]

It is technically possible. I have never done it on an active project. I
suspect it would be beneficial on a large scale project with someone who
knows what they're doing in all three programs. I wrote a paper on the
transfer process from Revit - gbXML - Trane Trace (RGT). It is attached.
I'm sure there are many similarities with the Revit - Ecotect - E+ process
as with the RGT process.

I also included my presentation at SimBuild.

(See attached file: p+_ALI_+v3.pdf)(See attached file: 2010-08-09 IBPSA
Presentation.pps)

Regards,
Shariq

Shariq Ali EIT, LEED AP BD+C
Mechanical Engineer
URS Corporation
1375 Euclid Ave. Suite 600
Cleveland, OH 44115
Direct: 216.622.2276
Fax: 216.622.2428

                                                                              
 This e-mail and any attachments contain URS Corporation confidential         
 information that may be proprietary or privileged. If you receive this       
 message in error or are not the intended recipient, you should not retain,   
 distribute, disclose or use any of this information and you should destroy   
 the e-mail and any attachments or copies.                                    
                                                                              



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20100825/2bb126fb/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: p+_ALI_+v3.pdf
Type: application/pdf
Size: 496012 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20100825/2bb126fb/attachment.pdf>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 2010-08-09 IBPSA Presentation.pps
Type: application/octet-stream
Size: 2769408 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20100825/2bb126fb/attachment.obj>