[Bldg-sim] Revit, Ecotect and EnergyPlus

Dason Whitsett dmwhitsett at gmail.com
Thu Aug 26 11:47:59 PDT 2010


I've experimented with this a bit, and it is possible.  However, the only useful information you really get out of Revit is the building form and even that requires substantial tweaking on one side or the other to make an appropriate energy model.  To my thinking, it is much more efficient to just import the geometry into SketchUp and use that as a background to trace while building a simplified thermal model in OpenStudio.  A similar process would work with any interface you choose.

Here is a link to a blog post that describes the process you're asking about.

http://openrevit.com/2009/12/export-revit-to-energyplus-via-ecotect/


Dason Whitsett

Lecturer, Sustainable Design Program
University of Texas at Austin
School of Architecture
1 University Station B7500
Austin, TX 78712-0222
512.743.6678
dmw at mail.utexas.edu



On Aug 25, 2010, at 2:12 PM, bldg-sim-request at lists.onebuilding.org wrote:

> Send Bldg-sim mailing list submissions to
> 	bldg-sim at lists.onebuilding.org
> 
> To subscribe or unsubscribe via the World Wide Web, visit
> 	http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> or, via email, send a message with subject or body 'help' to
> 	bldg-sim-request at lists.onebuilding.org
> 
> You can reach the person managing the list at
> 	bldg-sim-owner at lists.onebuilding.org
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Bldg-sim digest..."
> Today's Topics:
> 
>   1. Re: Revit, Ecotect and EnergyPlus (Shariq_Ali at URSCorp.com)
> 
> From: Shariq_Ali at URSCorp.com
> Date: August 25, 2010 2:06:40 PM CDT
> To: bldg-sim at lists.onebuilding.org
> Subject: Re: [Bldg-sim] Revit, Ecotect and EnergyPlus
> 
> 
> It is technically possible. I have never done it on an active project. I suspect it would be beneficial on a large scale project with someone who knows what they're doing in all three programs. I wrote a paper on the transfer process from Revit - gbXML - Trane Trace (RGT). It is attached. I'm sure there are many similarities with the Revit - Ecotect - E+ process as with the RGT process. 
> 
> I also included my presentation at SimBuild.
> 
> (See attached file: p+_ALI_+v3.pdf)(See attached file: 2010-08-09 IBPSA Presentation.pps)
> 
> Regards,
> Shariq
> 
> Shariq Ali EIT, LEED AP BD+C
> Mechanical Engineer
> URS Corporation
> 1375 Euclid Ave. Suite 600
> Cleveland, OH 44115
> Direct: 216.622.2276
> Fax: 216.622.2428
> 
> This e-mail and any attachments contain URS Corporation confidential information that may be proprietary or privileged. If you receive this message in error or are not the intended recipient, you should not retain, distribute, disclose or use any of this information and you should destroy the e-mail and any attachments or copies.
> 
> 
> 
> <p+_ALI_+v3.pdf><2010-08-09 IBPSA Presentation.pps>
> 
> _______________________________________________
> Bldg-sim mailing list
> Bldg-sim at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20100826/ff6612be/attachment.htm>


More information about the Bldg-sim mailing list