[Bldg-sim] Non-Convergence Work-Around does not work

[Linda Lam]

To Whom It May Concern:

We are working with a 2-layer glass, running under DIN EN410 
environmental conditions.  Calculations execute successfully in both the 
Glazing System library view and the Window Library view.  However, 
Window5 either crashes or gives the non-convergence error whenever I try 
to generate any report in either library view.  I have attempted to 
decrease the window height per instructions 
<http://windows.lbl.gov/software/window/52/NonConvergence.html> noted on 
the LBNL website for this bug, but I am still unable to generate the 
report.  It does generate reports when running with NFRC environmental 
conditions, but we need the report generated for DIN EN410 conditions 
specifically. 

The details are as follows, screenshot below:
Glass 1 is SB70XL, with coating on layer 2
Gas 1 is Argon
Glass 2 is a custom laminate with 70% white frit. (Note: a similar 
glazing system with 10% frit generates reports with no errors...)



Thank you!

-- 
Linda Lam
212 219 2255 | lam at transsolar.com
Transsolar Inc. | 134 Spring St. Suite 601 | New York, NY 10012

Transsolar Climate Engineering
Technical consulting for energy efficiency and environmental quality in buildings
New York - Stuttgart - Munich 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20100809/e2367c99/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: moz-screenshot-3.jpg
Type: image/jpeg
Size: 58543 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20100809/e2367c99/attachment.jpg>