[Bldg-sim] Mode Change - The missing data

[Ümit Esiyok]

Peter
yes you are right, it means firstly we should complete the inputs in
Wizard then start to work in DD. Maybe software developers can find a
solution for this because it would be very usefull to change the mode
without losing the informations.
Regards
> Umit-
> My understanding is that is a function of the program:
> Changes made in DD are not transfered back to Wizard Mode.  I think it is
> in
> the Tutorial.
>
> I experienced the same thing on an HVAC system, I added a humidifier in DD
> mode and it was lost in Wizard.
>
> Check the tutorial.  It states this fact, but not sure why
>
> Regards,
> W. Peter Anderson, P.E
> JP Engineering
> 41 Mechanic Street
> Windsor, CT 06095
> Ph: 860/688-5223
> Fax: 860/688-5269
> ----- Original Message -----
> From: "Ümit Esiyok" <umit.esiyok at uni-dortmund.de>
> To: <bldg-sim at lists.onebuilding.org>
> Sent: Thursday, February 07, 2008 8:40 AM
> Subject: [Bldg-sim] Mode Change - The missing data
>
>
> Dear all,
>
> I created windows and walls in "Detailed Data Edit" component Tree and
> changed the mode to "Wizard Data Edit" in order to check some inputs in
> building creation wizard. But the windows and walls that I defined were
> missing even in "Detailed Data Edit" Why? Why the change between Modes
> causes information lost?
>
>
> Regards
>
>
> --
> Ümit Esiyok
>
>
> _______________________________________________
> Bldg-sim mailing list
> Bldg-sim at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
>
>


-- 
Ümit Esiyok
Dr.-Ing., MSc. Arch.

Mobile: +49 17624362519
e-mails: umitesiyok at gmx.de
         umit.esiyok at uni-dortmund.de