[Bldg-sim] Mode Change - The missing data

[W. Peter Anderson]

Umit-
My understanding is that is a function of the program:
Changes made in DD are not transfered back to Wizard Mode.  I think it is in 
the Tutorial.

I experienced the same thing on an HVAC system, I added a humidifier in DD 
mode and it was lost in Wizard.

Check the tutorial.  It states this fact, but not sure why

Regards,
W. Peter Anderson, P.E
JP Engineering
41 Mechanic Street
Windsor, CT 06095
Ph: 860/688-5223
Fax: 860/688-5269
----- Original Message ----- 
From: "Ümit Esiyok" <umit.esiyok at uni-dortmund.de>
To: <bldg-sim at lists.onebuilding.org>
Sent: Thursday, February 07, 2008 8:40 AM
Subject: [Bldg-sim] Mode Change - The missing data


Dear all,

I created windows and walls in "Detailed Data Edit" component Tree and
changed the mode to "Wizard Data Edit" in order to check some inputs in
building creation wizard. But the windows and walls that I defined were
missing even in "Detailed Data Edit" Why? Why the change between Modes
causes information lost?


Regards


-- 
Ümit Esiyok


_______________________________________________
Bldg-sim mailing list
Bldg-sim at lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org