[BLDG-SIM] LEED C&S Lighting load

[Chris Jones]

The LEED C&S indicates that the lighting in the proposed and baseline 
cases should be the same.  What if the basebuilding lighting is 
already higher than the baseline value?  Even with a credit for 
occupancy sensors the average lighting load in the proposed design is 
higher than the ASHRAE 90.1-2004 values.  Should I model the lighting 
the same or as shown on the drawings?





Chris Jones, P.Eng.
14 Oneida Avenue
Toronto, ON M5J2E3
Tel. 416 203-7465
Fax. 416 946-1005 

======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20070808/8691c59e/attachment.htm>