<html>
<body>
<font face="Courier New, Courier">The LEED C&S indicates that the
lighting in the proposed and baseline cases should be the same.
What if the basebuilding lighting is already higher than the baseline
value? Even with a credit for occupancy sensors the average
lighting load in the proposed design is higher than the ASHRAE 90.1-2004
values. Should I model the lighting the same or as shown on the
drawings? <br><br>
<br><br>
<br>
<x-sigsep><p></x-sigsep>
Chris Jones, P.Eng.<br>
14 Oneida Avenue<br>
Toronto, ON M5J2E3<br>
Tel. 416 203-7465<br>
Fax. 416 946-1005</font><PRE>
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM@GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@GARD.COM
</PRE></body>
</html>