[BLDG-SIM] Heating & Ventilation in Mechanical Rooms
John Forester
jforester at dmiinc.com
Mon Aug 27 07:46:21 PDT 2007
Hello Everyone,
Using EQuest 3.6 for LEED modeling, I am trying to find the best method to
model a heating and exhaust fan system for mechanical rooms and other
equipment rooms that are not designed to have mechanical cooling. I know
that EQuest has a heating/ventilating system type. Is this the best system
to use and what schedules do I need to create? I would like to have exhaust
fans turn on at a certain room temperature (say 80°F) and unit heaters turn
on at 60°F. I would like both to remain off when the room temperature is in
between these two setpoints.
Any suggestions are appreciated.
John
John T. Forester, LEED AP
Demand Management Institute
35 Walnut Street
Wellesley, MA 02481
Phone: 781 431 1100 x14
Fax: 781 431 1109
email: <mailto:jforester at dmiinc.com> jforester at dmiinc.com
<mailto:jforester at dmiinc.comweb>
web: www.dmiinc.com
===========================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20070827/e73bf65b/attachment.htm>
More information about the Bldg-sim
mailing list