[BLDG-SIM] Exterior shades / daylight on floor surface - ECOTECT
Josh K
jeemang at gmail.com
Wed Aug 29 14:11:51 PDT 2007
I agree with the recommendation to check out DAYSIM; it's free, works very
nicely with ECOTECT, and in my experience, gives useful and accurate
results. I've provided a link to a .pdf that gives an excellent (and
succinct) introduction to using DAYSIM with ECOTECT.
http://irc.nrc-cnrc.gc.ca/ie/lighting/daylight/daysim/GettingStarted.pdf
Josh
Josh Kjenner, EIT, LEED AP
Manasc Isaac Architects Ltd.
10225 100 Avenue :: Edmonton, AB T5J 0A1
780.429.3977
On 8/29/07, Ramana Koti <ramana.koti at gmail.com> wrote:
>
> Leonard,
>
> I haven't done extensive daylighting simulation in Ecotect but I know that
> Ecotect uses split flux method to compute internally reflected component
> that tends to overpredict daylight levels at sensor points away from
> openings.
>
> Using Radiance or Radiance based software like DAYSIM or IES <VE> could be
> a better option.
>
> Ramana Koti, LEED AP
> Sustainable Building Analyst
>
> ELEMENTS division of BNIM architects
> 106 W. 14th Street Suite 200
> Kansas City, Missouri 64105
>
> p 816.783.1635 f 816.783.1501
> www.bnim.com| elements.bnim.com
>
> On 8/29/07, Leonard Sciarra <leonard_sciarra at gensler.com> wrote:
> >
> > I may be expanding the forum somewhat, but, does anyone have experience
> > modeling exterior shades / fins to optimize day lighting using Ecotect?
> >
> > I am modeling some exterior shades and it seems that the impact on
> > internal light levels is not being reflected to the degree I would expect.
> > Now I know the algorithm used uses a diffuse sky rather than direct
> > radiation, but still the effect of the shades does not seem to reduce the
> > internal light levels. I ran a check using insolation and direct radiation
> > so I know the model "sees" the shades, but the daylight is acting funny.
> >
> > Thanks.
> >
> >
> > Leonard Sciarra, AIA, LEED ap
> >
> > 312.577.6580 (Dir)
> >
> > G E N S L E R | Architecture & Design Worldwide
> >
> > 30 West Monroe Street
> >
> > Chicago IL, 60603
> >
> > 312.456.0123
> >
> > leonard_sciarra at gensler.com
> >
> >
> > You received this e-mail because you are subscribed
> > to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
> >
> > from this mailing list send a blank message to
> > BLDG-SIM-UNSUBSCRIBE at GARD.COM
> >
> >
>
>
>
>
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20070829/e4bd9fe1/attachment.htm>
More information about the Bldg-sim
mailing list