[TRNSYS-users] Information Request

[David BRADLEY via TRNSYS-users]

MebarkiChahrazed,

   I assume that you are using Type56 for the building model in your 
simulation. If so then you should be able to define the surfaces that 
you do not want to model as BOUNDARY walls that have no thermal mass 
(they are instead resistive only and have a very high thermal 
resistance). If you want to model one actual wall and one window then 
the other 5 walls would be modeled as high r-value (low u-value) surfaces.

kind regards,

  David



On 05/04/2017 05:46, Chahra MEB via TRNSYS-users wrote:
>
> Good Morning
>
> My name is MebarkiChahrazedand I'm a 2^nd PHD Student, I'm working on 
> the optimization of energy consumption in building and I just want to 
> know if TRNSYS16 can dothe simulationof thermal loads only for one 
> window or for one wall not for the entire local? for exempele if we 
> want to simulate only window gains whith TRNSYS 16, can that be possible?
>
> I really appreciate any help you can provide.
>
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170509/138049c8/attachment-0003.htm>