[TRNSYS-users] Chilled ceiling outlet temperature

[hotline via TRNSYS-users]

Dear Amaia,

a chilled ceiling is an active layer, too. So just choose your surface…

Best
Jakob

__________________________________________________________________________________________________

Jakob Merk M.Sc.

Transsolar Energietechnik GmbH
Curiestraße 2
70563 Stuttgart
Telefon: +49 711 67976-0
Fax:        +49 711 67976-11
Email:    merk at transsolar.com<mailto:merk at transsolar.com>
http://www.transsolar.com<http://www.transsolar.com/>
Transsolar: KlimaEngineering- Technologien für energieeffizientes Bauen und Nutzerkomfort in Gebäuden
Stuttgart – München – New York – Paris
Geschäftsführer :Diplom-Ingenieur Matthias Schuler, Diplom-Ingenieur Thomas Auer, Diplom-Physiker Stefan Holst, Diplom-Betriebswirt Dieter Schnelle
Eingetragen beim Amtsgericht Stuttgart HRB 23347,
Steuernummer: 99073/00911,USt-IdNr.: DE 152272639



Von: TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] Im Auftrag von Amaia Zuazua Ros via TRNSYS-users
Gesendet: 09 May 2017 09:04
An: TRNSYS users mailing list at OneBuilding.org <trnsys-users at lists.onebuilding.org>
Betreff: [TRNSYS-users] Chilled ceiling outlet temperature


Hello,

I have a question about the chilled ceiling in Type 56. I need the output of the outlet temperature of the chilled ceiling, but the NTYPE 58 doesn't recognize the "chilled ceiling" as an "active layer", I get the message "please select one wall with active layer!".

I don't have any active layer, just the chilled ceiling. Is there any other way to obtain the outlet temperature of the ceiling?

Thanks!

Amaia


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170509/07f3272f/attachment.htm>