[TRNSYS-users] Two instances of a type in one simulation

[David BRADLEY via TRNSYS-users]

Christain and Maroun,
  I would be very careful about workarounds. If you run a simulation 
that has one instance of a component in it, then drag out a second 
instance and the results of the first change then it is almost certain 
that the Type was not programmed in such a way as to allow there to be 
multiple instances in a simulation. They are sharing some data 
structures internally and there isn't really any way of getting around 
that except if you use a compiler to make a copy of the Type, give it a 
new Type number, then recompile and link it into its own DLL.
  In general the better solution is to be in contact with the author of 
Type399 (or with the distributor from whom you purchased it) and see if 
they can assist.
kind regards,
  David


On 05/20/2016 11:02, NEMAR Maroun via TRNSYS-users wrote:
> ​Christian,
>   I met almost the same problem two months ago, and I have solved 
> hardly. I don't know how can I show you through email, if you could 
> mail me your project and your PCM components to compare it with mine 
> then to fix it for you. If there any problem with you PCM component, 
> I'll make you know, if not I'll fix the problem the same way I've done.
>
> Best regards,
> *Maroun NEMAR*
> Building performance engineer
> *Building Energy Analysis & Engineering*
> T: 0620548116
> E: maroun.nemar at gmail.com <mailto:maroun.nemar at gmail.com>
> web site : www.bureauveritas.fr <http://www.bureauveritas.fr/>
>
> 2016-05-20 16:38 GMT+01:00 Christian Herløv Krintel 
> <trnsys-users at lists.onebuilding.org 
> <mailto:trnsys-users at lists.onebuilding.org>>:
>
>     Dear TRNSYS users,
>     I have a multizone building model, where I want to use two PCM
>     components (Type 399) to model the ceilings of two adjacent rooms.
>     When I run the simulation I noticed that the two components
>     somehow share information. The PCM temperature is the same in both
>     components.
>
>     I tried to switch the component order in the Control Cards, which
>     changes the PCM temperature, but they are still equal.
>     How can I run two instances of a type side-by-side? Is this a
>     limitation in how Type 399 was programmed?
>
>     Best Regards
>     Christian
>     _______________________________________________
>     TRNSYS-users mailing list
>     TRNSYS-users at lists.onebuilding.org
>     <mailto:TRNSYS-users at lists.onebuilding.org>
>     http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20160520/91404e63/attachment-0002.htm>