[TRNSYS-users] Welcome to the "TRNSYS-users" mailing list

[Chaminda Ranaweera]

Hello,

I am a Student at Clausthal University of Technology, 
Germany. I want to analyze Solar PV Outputs with its 
orientation and installed on actual buildings.

I modeled the building geometry by using GoogleSketchup 
and imported to TrnBuild. Now I run the building 
Simulation at TrnSys. It Shows the total beam solar 
Radiation and total solar Radiation on Roof of the 
building.

But I want to analyze the solar PV Output installed on the 
building Roof. Is it ok to get the solar Radiation on Roof 
of the building as a Input to solar PV Panels. The 
building is having a shading itself. It calculates the 
average solar Radiation on the surface as I know. I want 
to install solar PV Panels all over the Roof surface. So, 
to simulate the shading effects of different solar pv 
Arrays on the Roof.


Basically I want to calculate the solar PV Output on solar 
PV installed on a Roof of a given building.

Can you kindly help me to do the above Simulation.

Thank You,

Chaminda Ranaweera













On Mon, 09 May 2016 03:07:26 -0700
  trnsys-users-request at lists.onebuilding.org wrote:
> Welcome to the TRNSYS-users at lists.onebuilding.org 
>mailing list!
> 
> To post to this list, send your message to:
> 
>  trnsys-users at lists.onebuilding.org
> 
> General information about the mailing list is at:
> 
>  http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
> 
> 
> If you ever want to unsubscribe or change your options 
>(eg, switch to
> or from digest mode, change your password, etc.), visit 
>your
> subscription page at:
> 
>  http://lists.onebuilding.org/options.cgi/trnsys-users-onebuilding.org/chaminda.ranaweera%40tu-clausthal.de
> 
> 
> You can also make such adjustments via email by sending 
>a message to:
> 
>  TRNSYS-users-request at lists.onebuilding.org
> 
> with the word `help' in the subject or body (don't 
>include the
> quotes), and you will get back a message with 
>instructions.
> 
> You must know your password to change your options 
>(including changing
> the password, itself) or to unsubscribe without 
>confirmation.  It is:
> 
>  pakaya1234
> 
> Normally, Mailman will remind you of your 
>lists.onebuilding.org
> mailing list passwords once every month, although you 
>can disable this
> if you prefer.  This reminder will also include 
>instructions on how to
> unsubscribe or change your account options.  There is 
>also a button on
> your options page that will email your current password 
>to you.