[TRNSYS-users] Comfort parameters and energy consumption

[mcdowell at tess-inc.com]

Eduard - 

The component parameters-inputs-outputs can be seen by
double-clicking the component in the assembly window in Simulation
Studio. 

I would recommend going through the Getting Started manual and
some of the example projects before building a more complex simulation.


Much like a system in real life, you will need to add thermostats,
aquastats and controllers to properly model your system. 

Regards,


Tim 

---
Timothy P. McDowell
Executive Vice President
Thermal Energy
System Specialists, LLC
22 N Carroll St, Suite 370
Madison, WI
53703
608-274-2577

On 2013-03-19 03:49, LAHO DESIGN wrote: 

> Hi, 
>
I'm a student and I'm a new user of TRNSYS , 
> I want to link (type 666
) chiller with cooling tower (type 51) and (type 42) conditioning
equipment which are the input and output parameters ? 
> I want to
simulate an air handling unit consisting of intake air , heat recovery (
type 5), cooling coil (type 32), fan (type 111), air introducing
pipe(type 31), pumps for the chilled water from the chiller (type 110)

> what else do I need in order to track and control comfort parameters
and energy consumption of equipment only for cooling ? 
> all these are
related to type 56 
> please give me some examples in this regard or
some ideas how to finish this project, 
> 
> thank you , 
> Eduard
Riemschneider.
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130321/f1ba1cea/attachment-0005.htm>