[TRNSYS-users] Error from excessive number of outputs

[Pauline GELIN]

Hi,

I would like to know if anyone has already encounter the problem that TRNSYS simulation doesn't progress and report an error that seems to be caused by a too many outputs ?
In fact, this number is only 100 outputs. Is it what you have also seen?
When I try different configurations, with one or several printers type 25, this number seems to be a barrier.
How can I fix it?

Thanks a lot in advance for your answers.

Best regards,

Pauline GELIN
Ingénieur Conception environnementale

[cid:image001.jpg at 01CE8E0C.7D9F0B90]

[cid:image002.jpg at 01CE8E0C.7D9F0B90]
10 avenue des canuts
69120 VAULX EN VELIN
T : 04.37.45.33.33

Ligne directe : 04.37.45.33.47

www.katene.coop
www.quadriplus-groupe.com<http://www.quadriplus-groupe.com>
www.woopa.coop<http://www.woopa.coop>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130731/7bab5cf8/attachment-0004.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 1718 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130731/7bab5cf8/attachment-0008.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 1058 bytes
Desc: image002.jpg
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130731/7bab5cf8/attachment-0009.jpg>