[TRNSYS-users] Strange results from Type52

[a8304506 at graduate.hku.hk]

Hello.

I try to investigate the performance of a cooling coil at different chilled
water flow rates (see attached .tpf file).  When I adjust the control signal of
the water pump from 1 down to around 0.4, the chilled water leaving
temperatures increase as expected.  However, when I further reduce the control
signal, it appears that the leaving chilled water temperatures begin to
decrease.  Is it the problem from the cooling coil model or any other issue? 
Please advise.  I am using TRNSYS16.1.  Thank you!

Best Regards
Chun Kwong LEE
City University of Hong Kong





-------------- next part --------------
A non-text attachment was scrubbed...
Name: Test cooling coil_office_a1.tpf
Type: application/octet-stream
Size: 108652 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130710/5e9f4745/attachment-0004.obj>