[TRNSYS-users] Imposed ground temperature for "buried pipe" types

[C. Ionescu]

Hello!
 
Can anyone tell me if there is a possibility to impose the ground
temperature to a “buried pipe” in TRNSYS 17 (E.g. Type 952)? 
I have measured data for ground temperature variation and, according to this
 I want to simulate the variation of the fluid temperature inside the pipe. 

In TRNSYS 16 there was Type 31 (simple buried pipe), but in TRNSYS 17 all
the types for buried pipes use calculated temperature of the ground.
 
Thank you,
Cristi
 
    
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130228/c311a5c3/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: faint_grain.jpg
Type: image/jpeg
Size: 1458 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130228/c311a5c3/attachment-0003.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: butterfly_top.gif
Type: image/gif
Size: 12626 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130228/c311a5c3/attachment-0010.gif>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: butterfly_bottom.gif
Type: image/gif
Size: 20662 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130228/c311a5c3/attachment-0011.gif>