Hello TRNSYS-Community,
i've installed TRNSYS16 and TESSlib on my own computer. To start with my bachelorthesis, i want to run a simulation which was made by a predecessor. But the simulation doesn't work. In the simulation are used maybe 2-3 non-standart types. I have these two types in addtion.
Could it be possible, that first i have to install the type, so the simulation studio knows, where these types are?
I've added some Data for more explanations.
Thank you in aticioation!
Florian
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130215/fac545fd/attachment-0005.htm>
-------------- next part --------------
TRNSYS - the TRaNsient SYstem Simulation program
The Solar Energy Lab at the University of Wisconsin - Madison, USA
Le Centre Scientifique et Technique du Batiment, Sophia Antipolis, France
Transsolar Energietechnik GmBH, Stuttgart, Germany
Thermal Energy System Specialists, Madison Wisconsin, USA
Release 16.01.0000
Listing file for: "C:\Users\Florian Weiß\Documents\My Dropbox\Modul_Bachelorarbeit\Literatur\USB-Stick von Annett\TRNSYS\Sommer\AKA Sommer Flachkollektor Berlin Direktbetrieb geregelt.dck"
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : The TRNSYS Executable (TRNExe.exe) and main DLL (TRNDll.dll) are located in "C:\Program Files\Trnsys16_1\Exe"
*** Pre-Processing the TRNSYS EQUATIONs and CONSTANTs to check for fatal errors.
*** Pre-Processing of EQUATIONs and CONSTANTs completed with no fatal errors found.
*** Evaluating the EQUATIONs and CONSTANTs to determine their initial values.
*** Finished evaluating the EQUATIONs and CONSTANTs and ready to begin processing the remainder of the TRNSYS input file.
VERSION 16
*******************************************************************************
*** TRNSYS input file (deck) generated by TrnsysStudio
*** on Freitag, Februar 15, 2013 at 16:50
*** from TrnsysStudio project: C:\Users\Florian Weiß\Documents\My Dropbox\Modul_Bachelorarbeit\Literatur\USB-Stick von Annett\TRNSYS\Sommer\AKA Sommer Flachkollektor Berlin Direktbetrieb geregelt.tpf
***
*** If you edit this file, use the File/Import TRNSYS Input File function in
*** TrnsysStudio to update the project.
***
*** If you have problems, questions or suggestions please contact your local
*** TRNSYS distributor or mailto:software at cstb.fr
***
*******************************************************************************
*******************************************************************************
*** Units
*******************************************************************************
*******************************************************************************
*** Control cards
*******************************************************************************
* START, STOP and STEP
CONSTANTS 3
START=3730
STOP=3738
STEP=0.016666666
* User defined CONSTANTS
! Start time End time Time step
SIMULATION 3.7300000000000000E+03 3.7380000000000000E+03 1.6666666000000004E-02
! Integration Convergence
TOLERANCES 1.0000000000000002E-02 1.0000000000000002E-02
! Max iterations Max warnings Trace limit
LIMITS 50 50 31
! TRNSYS numerical integration solver method
DFQ 1
! TRNSYS output file width, number of characters
WIDTH 80
! NOLIST statement
LIST
! MAP statement
! Solver statement Minimum relaxation factor Maximum relaxation factor
SOLVER 0
1.000000000000000
1.000000000000000
! Nan DEBUG statement
NAN_CHECK 0
! Overwrite DEBUG statement
OVERWRITE_CHECK 0
! disable time report
TIME_REPORT 0
! EQUATION SOLVER statement
EQUATION SOLVING METHOD 0
* Model "Wetter" (Type 109)
*
UNIT 21 TYPE 109 Wetter
*$UNIT_NAME Wetter
*$MODEL .\Weather Data Reading and Processing\User Format\Type109-User.tmf
*$POSITION 721 82
*$LAYER Main #
PARAMETERS 4
! 1 Data Reader Mode
! 2 Logical unit
! 3 Sky model for diffuse radiation
! 4 Tracking mode
1.0000000000000000E+00 4.5000000000000000E+01 4.0000000000000000E+00 1.0000000000000000E+00
INPUTS 3
! [unconnected] Ground reflectance
! [unconnected] Slope of surface
! [unconnected] Azimuth of surface
CONST CONST CONST
*** INITIAL INPUT VALUES
2.0000000000000001E-01 3.0000000000000000E+01 0.0000000000000000E+00
*** External files
ASSIGN TRY_Stadtklima_mittleres_Berlin_konvertiert.dat 45
*|? Weather data file |1000
*------------------------------------------------------------------------------
* EQUATIONS "Zeit"
*
EQUATIONS 1
TimeOfTheYear = time
*$UNIT_NAME Zeit
*$LAYER Main
*$POSITION 251 776
*------------------------------------------------------------------------------
* Model "Ein-/Ausschalten" (Type 14)
*
UNIT 40 TYPE 14 Ein-/Ausschalten
*$UNIT_NAME Ein-/Ausschalten
*$MODEL .\Utility\Forcing Functions\General\Type14h.tmf
*$POSITION 260 178
*$LAYER Main #
PARAMETERS 12
! 1 Initial value of time
! 2 Initial value of function
! 3 Time at point-1
! 4 Value at point -1
! 5 Time at point-2
! 6 Value at point -2
! 7 Time at point-3
! 8 Value at point -3
! 9 Time at point-4
! 10 Value at point -4
! 11 Time at point-5
! 12 Value at point -5
0.0000000000000000E+00 0.0000000000000000E+00 6.0000000000000000E+00 0.0000000000000000E+00 6.0000000000000000E+00
1.0000000000000000E+00 1.9000000000000000E+01 1.0000000000000000E+00 1.9000000000000000E+01 0.0000000000000000E+00
2.4000000000000000E+01 0.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "Trockenkühlturm" (Type 251)
*
UNIT 29 TYPE 251 Trockenkühlturm
*$UNIT_NAME Trockenkühlturm
*$MODEL .\TU cooling tower\Type251.tmf
*$POSITION 183 352
*$LAYER Main #
PARAMETERS 10
! 1 Heat exchanger area
! 2 Design U Value
! 3 Design fluid flow rate
! 4 Desigin fluid specific heat
! 5 Design air flow rate
! 6 Design ambient air temperature
! 7 Rated fan power
! 8 Number of power coefficients
! 9 Power Coefficient-1
! 10 Power Coefficient-2
1.5680000000000001E+02 3.4969999999999999E+01 2.5000000000000000E+03 4.1859999999999999E+00 9.3000000000000000E+03
3.6000000000000000E+01 6.7000000000000000E+02 2.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00
INPUTS 4
! Rohr-12:Outlet temperature ->Fluid inlet temperature
! Rohr-12:Outlet flow rate ->Fluid flow rate
! Wetter:Ambient temperature ->Ambient temperature
! Regler:Control signal ->Fan control signal
59,1 59,2 21,1 43,1
*** INITIAL INPUT VALUES
2.4000000000000000E+01 2.5000000000000000E+03 2.9314999400000005E+02 1.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "Flachkollektor" (Type 1)
*
UNIT 3 TYPE 1 Flachkollektor
*$UNIT_NAME Flachkollektor
*$MODEL .\Solar Thermal Collectors\Quadratic Efficiency Collector\2nd-Order Incidence Angle Modifiers\Type1b.tmf
*$POSITION 510 146
*$LAYER Main #
PARAMETERS 11
! 1 Number in series
! 2 Collector area
! 3 Fluid specific heat
! 4 Efficiency mode
! 5 Tested flow rate
! 6 Intercept efficiency
! 7 Efficiency slope
! 8 Efficiency curvature
! 9 Optical mode 2
! 10 1st-order IAM
! 11 2nd-order IAM
4.0000000000000000E+00 3.7720000000000006E+01 3.6499999999999999E+00 1.0000000000000000E+00 1.5000000000000000E+01
7.8900000000000003E-01 1.3802400000000002E+01 3.9600000000000010E-02 2.0000000000000000E+00 9.0000000000000011E-02
0.0000000000000000E+00
INPUTS 9
! Rohr-2:Outlet temperature ->Inlet temperature
! Rohr-2:Outlet flow rate ->Inlet flowrate
! Wetter:Ambient temperature ->Ambient temperature
! Wetter:total radiation on tilted surface ->Incident radiation
! Wetter:total radiation on horizontal ->Total horizontal radiation
! Wetter:sky diffuse radiation on horizontal ->Horizontal diffuse radiation
! [unconnected] Ground reflectance
! Wetter:angle of incidence for tilted surface ->Incidence angle
! Wetter:slope of tilted surface ->Collector slope
48,1 48,2 21,1 21,18 21,12
21,14 CONST 21,22 21,23
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 1.0000000000000000E+01 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 2.0000000000000001E-01 4.5000000000000000E+01 3.0000000000000000E+01
*------------------------------------------------------------------------------
* Model "Wetterdaten" (Type 65)
*
UNIT 42 TYPE 65 Wetterdaten
*$UNIT_NAME Wetterdaten
*$MODEL .\Output\Online Plotter\Online Plotter With File\User-Supplied Units\Type65b.tmf
*$POSITION 813 200
*$LAYER Main #
PARAMETERS 12
! 1 Nb. of left-axis variables
! 2 Nb. of right-axis variables
! 3 Left axis minimum
! 4 Left axis maximum
! 5 Right axis minimum
! 6 Right axis maximum
! 7 Number of plots per simulation
! 8 X-axis gridpoints
! 9 Shut off Online w/o removing
! 10 Logical Unit for output file
! 11 Output file units
! 12 Output file delimiter
1.0000000000000000E+00 2.0000000000000000E+00 -1.2000000000000000E+01 5.0000000000000000E+01 0.0000000000000000E+00
2.0000000000000000E+03 1.0000000000000000E+00 1.2000000000000000E+01 0.0000000000000000E+00 4.7000000000000000E+01
1.0000000000000000E+00 0.0000000000000000E+00
INPUTS 3
! Wetter:Ambient temperature ->Left axis variable
! Einheiten-2:rad_coll_SI ->Right axis variable-1
! Einheiten-2:rad_total_SI ->Right axis variable-2
21,1 RAD_COLL_SI RAD_TOTAL_SI
*** INITIAL INPUT VALUES
Ambient total rad
°C °W/m² W/m²
LABELS 3
Temperatur [°C]
Strahlung [W/m^2]
Wetterdaten
*** External files
ASSIGN Strahlung.dat 47
*|? What file should the online print to? |1000
*------------------------------------------------------------------------------
* Model "Kälteleistung" (Type 62)
*
UNIT 34 TYPE 62 Kälteleistung
*$UNIT_NAME Kälteleistung
*$MODEL .\Utility\Calling External Programs\Excel\Type62.tmf
*$POSITION 143 761
*$LAYER Main #
PARAMETERS 4
! 1 Mode
! 2 Nb of inputs
! 3 Nb of outputs
! 4 Show Excel
0.0000000000000000E+00 1.0000000000000000E+00 5.0000000000000000E+00 0.0000000000000000E+00
INPUTS 1
! Zeit:TimeOfTheYear ->input
TIMEOFTHEYEAR
*** INITIAL INPUT VALUES
0.0000000000000000E+00
LABELS 1
Berlin_Stadtklima_mittleres_angepasst.xls
*------------------------------------------------------------------------------
* Model "Pumpe-4" (Type 110)
*
UNIT 31 TYPE 110 Pumpe-4
*$UNIT_NAME Pumpe-4
*$MODEL .\Hydronics\Pumps\Variable Speed\Type110.tmf
*$POSITION 295 376
*$LAYER Main #
*$# VARIABLE-SPEED PUMP
PARAMETERS 6
! 1 Rated flow rate
! 2 Fluid specific heat
! 3 Rated power
! 4 Motor heat loss fraction
! 5 Number of power coefficients
! 6 Power coefficient
2.5900000000000000E+03 4.1899999999999995E+00 6.9520000000000000E+03 0.0000000000000000E+00 1.0000000000000000E+00
1.0000000000000000E+00
INPUTS 5
! Rohr-10:Outlet temperature ->Inlet fluid temperature
! Rohr-10:Outlet flow rate ->Inlet fluid flow rate
! Ein-/Ausschalten:Average value of function ->Control signal
! [unconnected] Total pump efficiency
! [unconnected] Motor efficiency
57,1 57,2 40,1 CONST CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 0.0000000000000000E+00 1.0000000000000000E+00 6.0000000000000009E-01 9.0000000000000002E-01
*------------------------------------------------------------------------------
* Model "Pumpe-3" (Type 110)
*
UNIT 22 TYPE 110 Pumpe-3
*$UNIT_NAME Pumpe-3
*$MODEL .\Hydronics\Pumps\Variable Speed\Type110.tmf
*$POSITION 286 504
*$LAYER Main #
*$# VARIABLE-SPEED PUMP
PARAMETERS 6
! 1 Rated flow rate
! 2 Fluid specific heat
! 3 Rated power
! 4 Motor heat loss fraction
! 5 Number of power coefficients
! 6 Power coefficient
1.1710000000000000E+03 4.1899999999999995E+00 3.1430000000000000E+03 0.0000000000000000E+00 1.0000000000000000E+00
1.0000000000000000E+00
INPUTS 5
! Rohr-19:Outlet temperature ->Inlet fluid temperature
! Rohr-19:Outlet flow rate ->Inlet fluid flow rate
! Ein-/Ausschalten:Average value of function ->Control signal
! [unconnected] Total pump efficiency
! [unconnected] Motor efficiency
71,1 71,2 40,1 CONST CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 0.0000000000000000E+00 1.0000000000000000E+00 6.0000000000000009E-01 9.0000000000000002E-01
*------------------------------------------------------------------------------
* Model "Pumpe" (Type 110)
*
UNIT 5 TYPE 110 Pumpe
*$UNIT_NAME Pumpe
*$MODEL .\Hydronics\Pumps\Variable Speed\Type110.tmf
*$POSITION 455 290
*$LAYER Main #
*$# VARIABLE-SPEED PUMP
PARAMETERS 6
! 1 Rated flow rate
! 2 Fluid specific heat
! 3 Rated power
! 4 Motor heat loss fraction
! 5 Number of power coefficients
! 6 Power coefficient
5.6579999999999995E+02 3.6499999999999999E+00 1.5190000000000000E+03 0.0000000000000000E+00 1.0000000000000000E+00
1.0000000000000000E+00
INPUTS 5
! Rohr-3:Outlet temperature ->Inlet fluid temperature
! Rohr-3:Outlet flow rate ->Inlet fluid flow rate
! Solarregler:Pump3_signal ->Control signal
! [unconnected] Total pump efficiency
! [unconnected] Motor efficiency
49,1 49,2 PUMP3_SIGNAL CONST CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 0.0000000000000000E+00 1.0000000000000000E+00 6.0000000000000009E-01 9.0000000000000002E-01
*------------------------------------------------------------------------------
* Model "Pumpe-2" (Type 110)
*
UNIT 9 TYPE 110 Pumpe-2
*$UNIT_NAME Pumpe-2
*$MODEL .\Hydronics\Pumps\Variable Speed\Type110.tmf
*$POSITION 520 450
*$LAYER Main #
*$# VARIABLE-SPEED PUMP
PARAMETERS 6
! 1 Rated flow rate
! 2 Fluid specific heat
! 3 Rated power
! 4 Motor heat loss fraction
! 5 Number of power coefficients
! 6 Power coefficient
1.1710000000000000E+03 4.1899999999999995E+00 3.1430000000000000E+03 0.0000000000000000E+00 1.0000000000000000E+00
1.0000000000000000E+00
INPUTS 5
! Rohr-16:Outlet temperature ->Inlet fluid temperature
! Rohr-16:Outlet flow rate ->Inlet fluid flow rate
! Solarregler:Pump2_signal ->Control signal
! [unconnected] Total pump efficiency
! [unconnected] Motor efficiency
66,1 66,2 PUMP2_SIGNAL CONST CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 0.0000000000000000E+00 1.0000000000000000E+00 6.0000000000000009E-01 9.0000000000000002E-01
*------------------------------------------------------------------------------
* Model "Pumpe-5" (Type 110)
*
UNIT 15 TYPE 110 Pumpe-5
*$UNIT_NAME Pumpe-5
*$MODEL .\Hydronics\Pumps\Variable Speed\Type110.tmf
*$POSITION 552 653
*$LAYER Main #
*$# VARIABLE-SPEED PUMP
PARAMETERS 6
! 1 Rated flow rate
! 2 Fluid specific heat
! 3 Rated power
! 4 Motor heat loss fraction
! 5 Number of power coefficients
! 6 Power coefficient
1.1710000000000000E+03 4.1899999999999995E+00 3.1430000000000000E+03 0.0000000000000000E+00 1.0000000000000000E+00
1.0000000000000000E+00
INPUTS 5
! Rohr-14:Outlet temperature ->Inlet fluid temperature
! Rohr-14:Outlet flow rate ->Inlet fluid flow rate
! [unconnected] Control signal
! [unconnected] Total pump efficiency
! [unconnected] Motor efficiency
61,1 61,2 CONST AL CONST CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 0.0000000000000000E+00 0.0000000000000000E+00 6.0000000000000009E-01 9.0000000000000002E-01
*------------------------------------------------------------------------------
* Model "Temperaturen" (Type 65)
*
UNIT 19 TYPE 65 Temperaturen
*$UNIT_NAME Temperaturen
*$MODEL .\Output\Online Plotter\Online Plotter Without File\Type65d.tmf
*$POSITION 816 264
*$LAYER Main #
PARAMETERS 12
! 1 Nb. of left-axis variables
! 2 Nb. of right-axis variables
! 3 Left axis minimum
! 4 Left axis maximum
! 5 Right axis minimum
! 6 Right axis maximum
! 7 Number of plots per simulation
! 8 X-axis gridpoints
! 9 Shut off Online w/o removing
! 10 Logical unit for output file
! 11 Output file units
! 12 Output file delimiter
8.0000000000000000E+00 4.0000000000000000E+00 0.0000000000000000E+00 1.5000000000000000E+02 -2.0000000000000000E+04
3.0000000000000000E+04 1.0000000000000000E+00 1.2000000000000000E+01 0.0000000000000000E+00 -1.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00
INPUTS 12
! Flachkollektor:Outlet temperature ->Left axis variable-1
! Pufferspeicher:Temperature at outlet-1 ->Left axis variable-2
! Pufferspeicher:Temperature at outlet-2 ->Left axis variable-3
! Pufferspeicher:Temperature at outlet-3 ->Left axis variable-4
! Pufferspeicher:Average tank temperature ->Left axis variable-5
! Gaskessel:Outlet fluid temperature ->Left axis variable-6
! PlattenWÜ:Cold-side outlet temperature ->Left axis variable-7
! Trockenkühlturm:Fluid outlet temperature ->Left axis variable-8
! Einheiten-3:Q_useful_coll_SI ->Right axis variable-1
! Einheiten-3:Q_HX_SI ->Right axis variable-2
! Einheiten-3:Q_to_flows_SI ->Right axis variable-3
! Einheiten-3:Q_flow_2_SI ->Right axis variable-4
3,1 2,1 2,3 2,5 2,7
14,1 8,3 29,1 Q_USEFUL_COLL_SI Q_HX_SI
Q_TO_FLOWS_SI Q_FLOW_2_SI
*** INITIAL INPUT VALUES
Collector_Outlet t_out1 t_out2 t_out 3 t_avg
t_Gasboiler t_HX_CSout Cooler_out let Q_use ful_coll_SI Q_HX_SI
Q_to_flows_SI Q_flow_2_SI
LABELS 3
Temperatur [°C]
Temperaturen
*------------------------------------------------------------------------------
* EQUATIONS "Einheiten"
*
EQUATIONS 1
Q_k_SI = [34,2]/1000
*$UNIT_NAME Einheiten
*$LAYER Main
*$POSITION 292 776
*------------------------------------------------------------------------------
* Model "AKA Leistung" (Type 65)
*
UNIT 28 TYPE 65 AKA Leistung
*$UNIT_NAME AKA Leistung
*$MODEL .\Output\Online Plotter\Online Plotter With File\User-Supplied Units\Type65b.tmf
*$POSITION 819 690
*$LAYER Main #
PARAMETERS 12
! 1 Nb. of left-axis variables
! 2 Nb. of right-axis variables
! 3 Left axis minimum
! 4 Left axis maximum
! 5 Right axis minimum
! 6 Right axis maximum
! 7 Number of plots per simulation
! 8 X-axis gridpoints
! 9 Shut off Online w/o removing
! 10 Logical Unit for output file
! 11 Output file units
! 12 Output file delimiter
4.0000000000000000E+00 4.0000000000000000E+00 0.0000000000000000E+00 4.5000000000000000E+01 0.0000000000000000E+00
1.5000000000000000E+00 1.0000000000000000E+00 1.2000000000000000E+01 0.0000000000000000E+00 4.6000000000000000E+01
1.0000000000000000E+00 0.0000000000000000E+00
INPUTS 8
! Type177ak:Qg_SI ->Left axis variable-1
! Type177ak:Qe_SI ->Left axis variable-2
! Type177ak:Qac_SI ->Left axis variable-3
! Einheiten:Q_k_SI ->Left axis variable-4
! Type177ak:COP ->Right axis variable-1
! Type177ak:ON ->Right axis variable-2
! [unconnected] Right axis variable-3
! Regler:Control signal ->Right axis variable-4
23,12 23,13 23,14 Q_K_SI 23,10
23,15 CONST 43,1
*** INITIAL INPUT VALUES
Qg Qe Qac Q_k_S I COP
ON-OFF Gas_On-Off Cooler_con trol
°C °W/m² W/m² kW kW
kW kW -
LABELS 3
Leistung [kW]
Wirkungsgrad
AKA Leistungen
*** External files
ASSIGN AKA_Sommer_Beispieltag_Leistungen.dat 46
*|? What file should the online print to? |1000
*------------------------------------------------------------------------------
* Model "Gaskessel" (Type 700)
*
UNIT 14 TYPE 700 Gaskessel
*$UNIT_NAME Gaskessel
*$MODEL .\HVAC Library (TESS)\Boiler\Efficiencies as Inputs\Type700.tmf
*$POSITION 379 658
*$LAYER Main #
*$# BOILER
PARAMETERS 2
! 1 Rated Capacity
! 2 Fluid specific heat
5.7600000000000000E+04 4.1899999999999995E+00
INPUTS 6
! Rohr-13:Outlet temperature ->Inlet fluid temperature
! Rohr-13:Outlet flow rate ->Inlet fluid flowrate
! [unconnected] Input Control Signal
! [unconnected] Set-point temperature
! [unconnected] Boiler Efficiency
! [unconnected] Combustion Efficiency
60,1 60,2 CONST CONST CONST
CONST
*** INITIAL INPUT VALUES
1.0000000000000000E+01 0.0000000000000000E+00 0.0000000000000000E+00 7.0000000000000000E+01 8.8000000000000000E-01
9.3000000000000005E-01
*------------------------------------------------------------------------------
* Model "Type177ak" (Type 177)
*
UNIT 23 TYPE 177 Type177ak
*$UNIT_NAME Type177ak
*$MODEL .\HVAC\Absorption Chiller (Hot-Water Fired, Single Effect)\Type177ak.tmf
*$POSITION 189 520
*$LAYER Main #
*$# This TYPE simulates the part load behaviour of single staged H2O/LiBr-absorption chillers
PARAMETERS 20
! 1 Mode
! 2 qD0
! 3 qD1
! 4 qD2
! 5 BsD1
! 6 BsD2
! 7 qE0
! 8 qE1
! 9 qE2
! 10 BsE1
! 11 BsE2
! 12 t_cw1
! 13 t_cw2
! 14 t_hw1
! 15 t_hw2
! 16 t_ow1
! 17 t_ow2
! 18 m_D0
! 19 m_AC0
! 20 m_E0
-3.0000000000000000E+00 -2.5000000000000000E+00 5.3000000000000003E-01 0.0000000000000000E+00 -2.1000000000000001E+00
1.5000000000000000E+00 9.0000000000000002E-01 4.2000000000000004E-01 0.0000000000000000E+00 -2.5000000000000000E+00
1.8000000000000000E+00 1.8000000000000000E+01 4.0000000000000000E+01 5.5000000000000000E+01 1.0000000000000000E+02
3.0000000000000000E+00 2.2000000000000000E+01 1.1710000000000000E+03 2.5900000000000000E+03 2.8980000000000000E+03
INPUTS 6
! Rohr-9:Outlet temperature ->tgi
! Rohr-9:Outlet flow rate ->mgi
! Evap_in:t_Ei ->tei
! Evap_in:m_E ->mei
! Rohr-11:Outlet temperature ->taci
! Rohr-11:Outlet flow rate ->maci
54,1 54,2 T_EI M_E 56,1
56,2
*** INITIAL INPUT VALUES
1.1500000000000000E+02 1.1710000000000000E+03 8.0000000000000000E+00 2.8980000000000000E+03 2.7000000000000000E+01
2.5900000000000000E+03
*------------------------------------------------------------------------------
* Model "Pufferspeicher" (Type 534)
*
UNIT 2 TYPE 534 Pufferspeicher
*$UNIT_NAME Pufferspeicher
*$MODEL .\Storage Tank Library (TESS)\Cylindrical Tank\Vertical Cylinder\Type534.tmf
*$POSITION 513 552
*$LAYER Main #
*$# CYLINDRICAL STORAGE TANK
PARAMETERS 5
! 1 Logical unit for data file
! 2 # of tank nodes
! 3 Number of ports
! 4 Number of immersed heat exchangers
! 5 Number of miscellaneous heat flows
4.4000000000000000E+01 1.5000000000000000E+01 3.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
INPUTS 40
! Rohr-6:Outlet temperature ->Inlet temperature for port-1
! Rohr-6:Outlet flow rate ->Inlet flow rate for port-1
! Rohr-7:Outlet temperature ->Inlet temperature for port-2
! Rohr-7:Outlet flow rate ->Inlet flow rate for port-2
! Rohr-15:Outlet temperature ->Inlet temperature for port-3
! Rohr-15:Outlet flow rate ->Inlet flow rate for port-3
! [unconnected] Top loss temperature
! [unconnected] Edge loss temperature for node-1
! [unconnected] Edge loss temperature for node-2
! [unconnected] Edge loss temperature for node-3
! [unconnected] Edge loss temperature for node-4
! [unconnected] Edge loss temperature for node-5
! [unconnected] Edge loss temperature for node-6
! [unconnected] Edge loss temperature for node-7
! [unconnected] Edge loss temperature for node-8
! [unconnected] Edge loss temperature for node-9
! [unconnected] Edge loss temperature for node-10
! [unconnected] Edge loss temperature for node-11
! [unconnected] Edge loss temperature for node-12
! [unconnected] Edge loss temperature for node-13
! [unconnected] Edge loss temperature for node-14
! [unconnected] Edge loss temperature for node-15
! [unconnected] Bottom loss temperature
! [unconnected] Gas flue temperature
! [unconnected] Inversion mixing flow rate
! [unconnected] Auxiliary heat input for node-1
! [unconnected] Auxiliary heat input for node-2
! [unconnected] Auxiliary heat input for node-3
! [unconnected] Auxiliary heat input for node-4
! [unconnected] Auxiliary heat input for node-5
! [unconnected] Auxiliary heat input for node-6
! [unconnected] Auxiliary heat input for node-7
! [unconnected] Auxiliary heat input for node-8
! [unconnected] Auxiliary heat input for node-9
! [unconnected] Auxiliary heat input for node-10
! [unconnected] Auxiliary heat input for node-11
! [unconnected] Auxiliary heat input for node-12
! [unconnected] Auxiliary heat input for node-13
! [unconnected] Auxiliary heat input for node-14
! [unconnected] Auxiliary heat input for node-15
52,1 52,2 58,1 58,2 62,1
62,2 CONST CONST CONST OLL_SI CONST
CONST _SI CONST I CONST CONST CONST
CONST CONST CONST CONST CONST
CONST CONST CONST CONST CONST
CONST CONST CONST CONST CONST
CONST CONST CONST CONST CONST
CONST CONST CONST CONST CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 0.0000000000000000E+00 2.0000000000000000E+01 0.0000000000000000E+00 2.0000000000000000E+01
0.0000000000000000E+00 2.0000000000000000E+01 2.0000000000000000E+01 2.0000000000000000E+01 2.0000000000000000E+01
2.0000000000000000E+01 2.0000000000000000E+01 2.0000000000000000E+01 2.0000000000000000E+01 2.0000000000000000E+01
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 2.0000000000000000E+01 2.0000000000000000E+01 -1.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
DERIVATIVES 15
! 1 Initial Tank Temperature-1
! 2 Initial Tank Temperature-2
! 3 Initial Tank Temperature-3
! 4 Initial Tank Temperature-4
! 5 Initial Tank Temperature-5
! 6 Initial Tank Temperature-6
! 7 Initial Tank Temperature-7
! 8 Initial Tank Temperature-8
! 9 Initial Tank Temperature-9
! 10 Initial Tank Temperature-10
! 11 Initial Tank Temperature-11
! 12 Initial Tank Temperature-12
! 13 Initial Tank Temperature-13
! 14 Initial Tank Temperature-14
! 15 Initial Tank Temperature-15
5.5000000000000000E+01 5.0000000000000000E+01 4.5000000000000000E+01 4.0000000000000000E+01 3.5000000000000000E+01
3.0000000000000000E+01 2.5000000000000000E+01 2.0000000000000000E+01 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
*** External files
ASSIGN Example_534.dat 44
*|? Which file contains the parameter values for this component? |1000
*------------------------------------------------------------------------------
* Model "PlattenWÜ" (Type 5)
*
UNIT 8 TYPE 5 PlattenWÜ
*$UNIT_NAME PlattenWÜ
*$MODEL .\Heat Exchangers\Counter Flow\Type5b.tmf
*$POSITION 511 392
*$LAYER Main #
PARAMETERS 4
! 1 Counter flow mode
! 2 Specific heat of hot side fluid
! 3 Specific heat of cold side fluid
! 4 Not used
2.0000000000000000E+00 3.6499999999999999E+00 4.1899999999999995E+00 0.0000000000000000E+00
INPUTS 5
! Rohr:Outlet temperature ->Hot side inlet temperature
! Rohr:Outlet flow rate ->Hot side flow rate
! Rohr-20:Outlet temperature ->Cold side inlet temperature
! Rohr-20:Outlet flow rate ->Cold side flow rate
! [unconnected] Overall heat transfer coefficient of exchanger
50,1 50,2 73,1 73,2 CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 5.6579999999999995E+02 2.0000000000000000E+01 5.2800000000000000E+02 1.3035600000000000E+04
*------------------------------------------------------------------------------
* Model "AKA Temp." (Type 65)
*
UNIT 27 TYPE 65 AKA Temp.
*$UNIT_NAME AKA Temp.
*$MODEL .\Output\Online Plotter\Online Plotter Without File\Type65d.tmf
*$POSITION 823 594
*$LAYER Main #
PARAMETERS 12
! 1 Nb. of left-axis variables
! 2 Nb. of right-axis variables
! 3 Left axis minimum
! 4 Left axis maximum
! 5 Right axis minimum
! 6 Right axis maximum
! 7 Number of plots per simulation
! 8 X-axis gridpoints
! 9 Shut off Online w/o removing
! 10 Logical unit for output file
! 11 Output file units
! 12 Output file delimiter
3.0000000000000000E+00 3.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+02 0.0000000000000000E+00
3.0000000000000000E+03 1.0000000000000000E+00 1.2000000000000000E+01 0.0000000000000000E+00 -1.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00
INPUTS 6
! Type177ak:tgo ->Left axis variable-1
! Type177ak:teo ->Left axis variable-2
! Type177ak:taco ->Left axis variable-3
! Type177ak:mgo ->Right axis variable-1
! Type177ak:meo ->Right axis variable-2
! Type177ak:maco ->Right axis variable-3
23,1 23,3 23,5 23,2 23,4
23,6
*** INITIAL INPUT VALUES
tgo teo taco mgo meo
maco
LABELS 3
Temperaturen [°C]
Massenstrom [kg/h]
AKA Temperaturen
*------------------------------------------------------------------------------
* Model "Regler" (Type 22)
*
UNIT 43 TYPE 22 Regler
*$UNIT_NAME Regler
*$MODEL .\Controllers\Iterative Feedback Controller\Type22.tmf
*$POSITION 65 488
*$LAYER Main #
PARAMETERS 2
! 1 mode
! 2 Maximum number of oscillations
0.0000000000000000E+00 0.0000000000000000E+00
INPUTS 7
! teo_set:t_Eo_set ->Setpoint
! Type177ak:teo ->Controlled variable
! Ein-/Ausschalten:Average value of function ->On / Off signal
! [unconnected] Minimum control signal
! [unconnected] Maximum control signal
! [unconnected] Threshold for non-zero output
! [unconnected] Tolerance on tracking error
T_EO_SET 23,3 40,1 CONST CONST
CONST CONST
*** INITIAL INPUT VALUES
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "Hysterese Regler" (Type 2)
*
UNIT 44 TYPE 2 Hysterese Regler
*$UNIT_NAME Hysterese Regler
*$MODEL .\Controllers\Differential Controller w_ Hysteresis\for Temperatures\Solver 0 (Successive Substitution) Control Strategy\Type2b.tmf
*$POSITION 430 168
*$LAYER Controls #
*$# NOTE: This control strategy can only be used with solver 0 (Successive substitution)
*$#
PARAMETERS 2
! 1 No. of oscillations
! 2 High limit cut-out
5.0000000000000000E+00 1.0000000000000000E+02
INPUTS 6
! Flachkollektor:Outlet temperature ->Upper input temperature Th
! Pufferspeicher:Temperature at outlet-2 ->Lower input temperature Tl
! Pufferspeicher:Temperature at outlet-1 ->Monitoring temperature Tin
! Solarregler:Diff_signal ->Input control function
! [unconnected] Upper dead band dT
! [unconnected] Lower dead band dT
3,1 2,3 2,1 DIFF_SIGNAL CONST
CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+01 2.0000000000000000E+01 0.0000000000000000E+00 1.0000000000000000E+01
2.0000000000000000E+00
*------------------------------------------------------------------------------
* EQUATIONS "Solarregler"
*
EQUATIONS 5
Pump_signal = [40,1]*[44,1]
Ventil_contrl = gt([34,2],0)
Pump2_signal = NOT(gt([34,2],0))*[40,1]
Diff_signal = AND(not(and(gt([34,2],0),gt([8,3],55))),[44,1])
Pump3_signal = OR(and(gt([34,2],0),gt([8,3],55))*[40,1],[44,1]*[40,1])
*$UNIT_NAME Solarregler
*$LAYER Main
*$POSITION 349 168
*------------------------------------------------------------------------------
* EQUATIONS "Evap_in"
*
EQUATIONS 6
t_Di = 75
t_Ei = 19
t_ACi = 30
m_D = 1171
m_E = 2898*[40,1]
m_AC = 2590
*$UNIT_NAME Evap_in
*$LAYER Main
*$POSITION 189 635
*------------------------------------------------------------------------------
* EQUATIONS "teo_set"
*
EQUATIONS 1
t_Eo_set = max(16,(19-([34,2]/(0.805*4185))))
*$UNIT_NAME teo_set
*$LAYER Main
*$POSITION 57 616
*------------------------------------------------------------------------------
* Model "Rohr-2" (Type 709)
*
UNIT 48 TYPE 709 Rohr-2
*$UNIT_NAME Rohr-2
*$MODEL .\Hydronics Library (TESS)\Circular Pipe\Type709.tmf
*$POSITION 465 226
*$LAYER Main #
*$# PIPE
PARAMETERS 12
! 1 Inside diameter
! 2 Outside diameter
! 3 Pipe length
! 4 Pipe thermal conductivity
! 5 Fluid density
! 6 Fluid specific heat
! 7 Fluid thermal conductivity
! 8 Fluid viscosity
! 9 Initial fluid temperature
! 10 Number of nodes
! 11 Insulation thickness
! 12 Conductivity of insulation
2.5000000000000005E-02 2.8000000000000004E-02 7.5000000000000000E+00 1.0800000000000000E+03 1.0200000000000000E+03
3.6499999999999999E+00 1.5840000000000001E+00 6.1199999999999992E+00 1.0000000000000000E+01 1.0000000000000000E+00
3.0000000000000002E-02 1.2600000000000000E-01
INPUTS 4
! Pumpe:Outlet fluid temperature ->Inlet temperature
! Pumpe:Outlet flow rate ->Inlet flow rate
! [unconnected] Outer surface convection coefficient
! Wetter:Ambient temperature ->Loss temperature for node
5,1 5,2 CONST 21,1
*** INITIAL INPUT VALUES
1.0000000000000000E+01 1.0000000000000000E+02 1.0000000000000000E+01 1.0000000000000000E+01
*------------------------------------------------------------------------------
* Model "Rohr-3" (Type 709)
*
UNIT 49 TYPE 709 Rohr-3
*$UNIT_NAME Rohr-3
*$MODEL .\Hydronics Library (TESS)\Circular Pipe\Type709.tmf
*$POSITION 454 344
*$LAYER Main #
*$# PIPE
PARAMETERS 12
! 1 Inside diameter
! 2 Outside diameter
! 3 Pipe length
! 4 Pipe thermal conductivity
! 5 Fluid density
! 6 Fluid specific heat
! 7 Fluid thermal conductivity
! 8 Fluid viscosity
! 9 Initial fluid temperature
! 10 Number of nodes
! 11 Insulation thickness
! 12 Conductivity of insulation
2.5000000000000005E-02 2.8000000000000004E-02 7.5000000000000000E+00 1.0800000000000000E+03 1.0200000000000000E+03
3.6499999999999999E+00 1.5840000000000001E+00 6.1199999999999992E+00 1.0000000000000000E+01 1.0000000000000000E+00
3.0000000000000002E-02 1.2600000000000000E-01
INPUTS 4
! PlattenWÜ:Hot-side outlet temperature ->Inlet temperature
! PlattenWÜ:Hot-side flow rate ->Inlet flow rate
! [unconnected] Outer surface convection coefficient
! Wetter:Ambient temperature ->Loss temperature for node
8,1 8,2 CONST 21,1
*** INITIAL INPUT VALUES
1.0000000000000000E+01 1.0000000000000000E+02 1.0000000000000000E+01 1.0000000000000000E+01
*------------------------------------------------------------------------------
* Model "Rohr" (Type 709)
*
UNIT 50 TYPE 709 Rohr
*$UNIT_NAME Rohr
*$MODEL .\Hydronics Library (TESS)\Circular Pipe\Type709.tmf
*$POSITION 604 248
*$LAYER Main #
*$# PIPE
PARAMETERS 12
! 1 Inside diameter
! 2 Outside diameter
! 3 Pipe length
! 4 Pipe thermal conductivity
! 5 Fluid density
! 6 Fluid specific heat
! 7 Fluid thermal conductivity
! 8 Fluid viscosity
! 9 Initial fluid temperature
! 10 Number of nodes
! 11 Insulation thickness
! 12 Conductivity of insulation
2.5000000000000005E-02 2.8000000000000004E-02 1.5000000000000000E+01 1.0800000000000000E+03 1.0200000000000000E+03
3.6499999999999999E+00 1.5840000000000001E+00 6.1199999999999992E+00 1.0000000000000000E+01 1.0000000000000000E+00
3.0000000000000002E-02 1.2600000000000000E-01
INPUTS 4
! Flachkollektor:Outlet temperature ->Inlet temperature
! Flachkollektor:Outlet flowrate ->Inlet flow rate
! [unconnected] Outer surface convection coefficient
! Wetter:Ambient temperature ->Loss temperature for node
3,1 3,2 CONST 21,1
*** INITIAL INPUT VALUES
1.0000000000000000E+01 1.0000000000000000E+02 1.0000000000000000E+01 1.0000000000000000E+01
*------------------------------------------------------------------------------
* Model "Rohr-4" (Type 709)
*
UNIT 51 TYPE 709 Rohr-4
*$UNIT_NAME Rohr-4
*$MODEL .\Hydronics Library (TESS)\Circular Pipe\Type709.tmf
*$POSITION 440 450
*$LAYER Main #
*$# PIPE
PARAMETERS 12
! 1 Inside diameter
! 2 Outside diameter
! 3 Pipe length
! 4 Pipe thermal conductivity
! 5 Fluid density
! 6 Fluid specific heat
! 7 Fluid thermal conductivity
! 8 Fluid viscosity
! 9 Initial fluid temperature
! 10 Number of nodes
! 11 Insulation thickness
! 12 Conductivity of insulation
2.5000000000000005E-02 2.8000000000000004E-02 2.0000000000000000E+00 1.0800000000000000E+03 9.9021000000000004E+02
4.1779999999999999E+00 2.0880000000000001E+00 2.1459999999999999E+00 1.0000000000000000E+01 1.0000000000000000E+00
3.0000000000000002E-02 1.2600000000000000E-01
INPUTS 4
! Pumpe-2:Outlet fluid temperature ->Inlet temperature
! Pumpe-2:Outlet flow rate ->Inlet flow rate
! [unconnected] Outer surface convection coefficient
! [unconnected] Loss temperature for node
9,1 9,2 CONST CONST
*** INITIAL INPUT VALUES
1.0000000000000000E+01 1.0000000000000000E+02 1.0000000000000000E+01 1.0000000000000000E+01
*------------------------------------------------------------------------------
* Model "Rohr-6" (Type 709)
*
UNIT 52 TYPE 709 Rohr-6
*$UNIT_NAME Rohr-6
*$MODEL .\Hydronics Library (TESS)\Circular Pipe\Type709.tmf
*$POSITION 610 504
*$LAYER Main #
*$# PIPE
PARAMETERS 12
! 1 Inside diameter
! 2 Outside diameter
! 3 Pipe length
! 4 Pipe thermal conductivity
! 5 Fluid density
! 6 Fluid specific heat
! 7 Fluid thermal conductivity
! 8 Fluid viscosity
! 9 Initial fluid temperature
! 10 Number of nodes
! 11 Insulation thickness
! 12 Conductivity of insulation
2.5000000000000005E-02 2.8000000000000004E-02 2.0000000000000000E+00 1.0800000000000000E+03 9.9021000000000004E+02
4.1779999999999999E+00 2.0880000000000001E+00 2.1459999999999999E+00 1.0000000000000000E+01 1.0000000000000000E+00
3.0000000000000002E-02 1.2600000000000000E-01
INPUTS 4
! Ventil-2:Temperature at outlet 1 ->Inlet temperature
! Ventil-2:Flow rate at outlet 1 ->Inlet flow rate
! [unconnected] Outer surface convection coefficient
! [unconnected] Loss temperature for node
65,1 65,2 CONST CONST
*** INITIAL INPUT VALUES
1.0000000000000000E+01 1.0000000000000000E+02 1.0000000000000000E+01 1.0000000000000000E+01
*------------------------------------------------------------------------------
* Model "Rohr-5" (Type 709)
*
UNIT 53 TYPE 709 Rohr-5
*$UNIT_NAME Rohr-5
*$MODEL .\Hydronics Library (TESS)\Circular Pipe\Type709.tmf
*$POSITION 642 418
*$LAYER Main #
*$# PIPE
PARAMETERS 12
! 1 Inside diameter
! 2 Outside diameter
! 3 Pipe length
! 4 Pipe thermal conductivity
! 5 Fluid density
! 6 Fluid specific heat
! 7 Fluid thermal conductivity
! 8 Fluid viscosity
! 9 Initial fluid temperature
! 10 Number of nodes
! 11 Insulation thickness
! 12 Conductivity of insulation
2.5000000000000005E-02 2.8000000000000004E-02 3.0000000000000000E+00 1.0800000000000000E+03 9.9021000000000004E+02
4.1779999999999999E+00 2.0880000000000001E+00 2.1459999999999999E+00 1.0000000000000000E+01 1.0000000000000000E+00
3.0000000000000002E-02 1.2600000000000000E-01
INPUTS 4
! PlattenWÜ:Cold-side outlet temperature ->Inlet temperature
! PlattenWÜ:Cold-side flow rate ->Inlet flow rate
! [unconnected] Outer surface convection coefficient
! [unconnected] Loss temperature for node
8,3 8,4 CONST CONST
*** INITIAL INPUT VALUES
1.0000000000000000E+01 1.0000000000000000E+02 1.0000000000000000E+01 2.0000000000000000E+01
*------------------------------------------------------------------------------
* Model "Rohr-9" (Type 709)
*
UNIT 54 TYPE 709 Rohr-9
*$UNIT_NAME Rohr-9
*$MODEL .\Hydronics Library (TESS)\Circular Pipe\Type709.tmf
*$POSITION 258 568
*$LAYER Main #
*$# PIPE
PARAMETERS 12
! 1 Inside diameter
! 2 Outside diameter
! 3 Pipe length
! 4 Pipe thermal conductivity
! 5 Fluid density
! 6 Fluid specific heat
! 7 Fluid thermal conductivity
! 8 Fluid viscosity
! 9 Initial fluid temperature
! 10 Number of nodes
! 11 Insulation thickness
! 12 Conductivity of insulation
2.5000000000000005E-02 2.8000000000000004E-02 2.0000000000000000E+00 1.0800000000000000E+03 9.9021000000000004E+02
4.1779999999999999E+00 2.0880000000000001E+00 2.1459999999999999E+00 1.0000000000000000E+01 1.0000000000000000E+00
3.0000000000000002E-02 1.2600000000000000E-01
INPUTS 4
! T-Stück-2:Outlet temperature ->Inlet temperature
! T-Stück-2:Outlet flow rate ->Inlet flow rate
! [unconnected] Outer surface convection coefficient
! [unconnected] Loss temperature for node
67,1 67,2 CONST CONST
*** INITIAL INPUT VALUES
1.0000000000000000E+01 1.0000000000000000E+02 1.0000000000000000E+01 1.0000000000000000E+01
*------------------------------------------------------------------------------
* Model "Rohr-8" (Type 709)
*
UNIT 55 TYPE 709 Rohr-8
*$UNIT_NAME Rohr-8
*$MODEL .\Hydronics Library (TESS)\Circular Pipe\Type709.tmf
*$POSITION 333 504
*$LAYER Main #
*$# PIPE
PARAMETERS 12
! 1 Inside diameter
! 2 Outside diameter
! 3 Pipe length
! 4 Pipe thermal conductivity
! 5 Fluid density
! 6 Fluid specific heat
! 7 Fluid thermal conductivity
! 8 Fluid viscosity
! 9 Initial fluid temperature
! 10 Number of nodes
! 11 Insulation thickness
! 12 Conductivity of insulation
2.5000000000000005E-02 2.8000000000000004E-02 2.0000000000000000E+00 1.0800000000000000E+03 9.9021000000000004E+02
4.1779999999999999E+00 2.0880000000000001E+00 2.1459999999999999E+00 1.0000000000000000E+01 1.0000000000000000E+00
3.0000000000000002E-02 1.2600000000000000E-01
INPUTS 4
! Pumpe-3:Outlet fluid temperature ->Inlet temperature
! Pumpe-3:Outlet flow rate ->Inlet flow rate
! [unconnected] Outer surface convection coefficient
! [unconnected] Loss temperature for node
22,1 22,2 CONST CONST
*** INITIAL INPUT VALUES
1.0000000000000000E+01 1.0000000000000000E+02 1.0000000000000000E+01 2.0000000000000000E+01
*------------------------------------------------------------------------------
* Model "Rohr-10" (Type 709)
*
UNIT 57 TYPE 709 Rohr-10
*$UNIT_NAME Rohr-10
*$MODEL .\Hydronics Library (TESS)\Circular Pipe\Type709.tmf
*$POSITION 251 344
*$LAYER Main #
*$# PIPE
PARAMETERS 12
! 1 Inside diameter
! 2 Outside diameter
! 3 Pipe length
! 4 Pipe thermal conductivity
! 5 Fluid density
! 6 Fluid specific heat
! 7 Fluid thermal conductivity
! 8 Fluid viscosity
! 9 Initial fluid temperature
! 10 Number of nodes
! 11 Insulation thickness
! 12 Conductivity of insulation
2.5000000000000005E-02 2.8000000000000004E-02 7.5000000000000000E+00 1.0800000000000000E+03 9.9821000000000004E+02
4.1779999999999999E+00 2.1850000000000001E+00 3.5789999999999997E+00 1.0000000000000000E+01 1.0000000000000000E+00
3.0000000000000002E-02 1.2600000000000000E-01
INPUTS 4
! Trockenkühlturm:Fluid outlet temperature ->Inlet temperature
! Trockenkühlturm:Outlet fluid flow rate ->Inlet flow rate
! [unconnected] Outer surface convection coefficient
! Wetter:Ambient temperature ->Loss temperature for node
29,1 29,2 CONST 21,1
*** INITIAL INPUT VALUES
1.0000000000000000E+01 1.0000000000000000E+02 1.0000000000000000E+01 1.0000000000000000E+01
*------------------------------------------------------------------------------
* Model "Rohr-7" (Type 709)
*
UNIT 58 TYPE 709 Rohr-7
*$UNIT_NAME Rohr-7
*$MODEL .\Hydronics Library (TESS)\Circular Pipe\Type709.tmf
*$POSITION 453 491
*$LAYER Main #
*$# PIPE
PARAMETERS 12
! 1 Inside diameter
! 2 Outside diameter
! 3 Pipe length
! 4 Pipe thermal conductivity
! 5 Fluid density
! 6 Fluid specific heat
! 7 Fluid thermal conductivity
! 8 Fluid viscosity
! 9 Initial fluid temperature
! 10 Number of nodes
! 11 Insulation thickness
! 12 Conductivity of insulation
2.5000000000000005E-02 2.8000000000000004E-02 1.0000000000000000E+00 1.0800000000000000E+03 9.9021000000000004E+02
4.1779999999999999E+00 2.0880000000000001E+00 2.1459999999999999E+00 1.0000000000000000E+01 1.0000000000000000E+00
3.0000000000000002E-02 1.2600000000000000E-01
INPUTS 4
! Ventil:Temperature at outlet 1 ->Inlet temperature
! Ventil:Flow rate at outlet 1 ->Inlet flow rate
! [unconnected] Outer surface convection coefficient
! [unconnected] Loss temperature for node
70,1 70,2 CONST CONST
*** INITIAL INPUT VALUES
1.0000000000000000E+01 1.0000000000000000E+02 1.0000000000000000E+01 1.0000000000000000E+01
*------------------------------------------------------------------------------
* Model "Rohr-11" (Type 709)
*
UNIT 56 TYPE 709 Rohr-11
*$UNIT_NAME Rohr-11
*$MODEL .\Hydronics Library (TESS)\Circular Pipe\Type709.tmf
*$POSITION 251 440
*$LAYER Main #
*$# PIPE
PARAMETERS 12
! 1 Inside diameter
! 2 Outside diameter
! 3 Pipe length
! 4 Pipe thermal conductivity
! 5 Fluid density
! 6 Fluid specific heat
! 7 Fluid thermal conductivity
! 8 Fluid viscosity
! 9 Initial fluid temperature
! 10 Number of nodes
! 11 Insulation thickness
! 12 Conductivity of insulation
2.5000000000000005E-02 2.8000000000000004E-02 2.0000000000000000E+00 1.0800000000000000E+03 9.9021000000000004E+02
4.1779999999999999E+00 2.0880000000000001E+00 2.1459999999999999E+00 1.0000000000000000E+01 1.0000000000000000E+00
3.0000000000000002E-02 1.2600000000000000E-01
INPUTS 4
! Pumpe-4:Outlet fluid temperature ->Inlet temperature
! Pumpe-4:Outlet flow rate ->Inlet flow rate
! [unconnected] Outer surface convection coefficient
! Wetter:Ambient temperature ->Loss temperature for node
31,1 31,2 CONST 21,1
*** INITIAL INPUT VALUES
1.0000000000000000E+01 1.0000000000000000E+02 1.0000000000000000E+01 1.0000000000000000E+01
*------------------------------------------------------------------------------
* Model "Rohr-12" (Type 709)
*
UNIT 59 TYPE 709 Rohr-12
*$UNIT_NAME Rohr-12
*$MODEL .\Hydronics Library (TESS)\Circular Pipe\Type709.tmf
*$POSITION 134 429
*$LAYER Main #
*$# PIPE
PARAMETERS 12
! 1 Inside diameter
! 2 Outside diameter
! 3 Pipe length
! 4 Pipe thermal conductivity
! 5 Fluid density
! 6 Fluid specific heat
! 7 Fluid thermal conductivity
! 8 Fluid viscosity
! 9 Initial fluid temperature
! 10 Number of nodes
! 11 Insulation thickness
! 12 Conductivity of insulation
2.5000000000000005E-02 2.8000000000000004E-02 2.0000000000000000E+00 1.0800000000000000E+03 9.9021000000000004E+02
4.1779999999999999E+00 2.0880000000000001E+00 2.1459999999999999E+00 1.0000000000000000E+01 1.0000000000000000E+00
3.0000000000000002E-02 1.2600000000000000E-01
INPUTS 4
! Type177ak:taco ->Inlet temperature
! Type177ak:maco ->Inlet flow rate
! [unconnected] Outer surface convection coefficient
! Wetter:Ambient temperature ->Loss temperature for node
23,5 23,6 CONST 21,1
*** INITIAL INPUT VALUES
1.0000000000000000E+01 1.0000000000000000E+02 1.0000000000000000E+01 1.0000000000000000E+01
*------------------------------------------------------------------------------
* Model "Rohr-13" (Type 709)
*
UNIT 60 TYPE 709 Rohr-13
*$UNIT_NAME Rohr-13
*$MODEL .\Hydronics Library (TESS)\Circular Pipe\Type709.tmf
*$POSITION 443 600
*$LAYER Main #
*$# PIPE
PARAMETERS 12
! 1 Inside diameter
! 2 Outside diameter
! 3 Pipe length
! 4 Pipe thermal conductivity
! 5 Fluid density
! 6 Fluid specific heat
! 7 Fluid thermal conductivity
! 8 Fluid viscosity
! 9 Initial fluid temperature
! 10 Number of nodes
! 11 Insulation thickness
! 12 Conductivity of insulation
2.5000000000000005E-02 2.8000000000000004E-02 2.0000000000000000E+00 1.0800000000000000E+03 9.9021000000000004E+02
4.1779999999999999E+00 2.0880000000000001E+00 2.1459999999999999E+00 1.0000000000000000E+01 1.0000000000000000E+00
3.0000000000000002E-02 1.2600000000000000E-01
INPUTS 4
! Pufferspeicher:Temperature at outlet-3 ->Inlet temperature
! Pufferspeicher:Flow rate at outlet-3 ->Inlet flow rate
! [unconnected] Outer surface convection coefficient
! [unconnected] Loss temperature for node
2,5 2,6 CONST CONST
*** INITIAL INPUT VALUES
1.0000000000000000E+01 1.0000000000000000E+02 1.0000000000000000E+01 1.0000000000000000E+01
*------------------------------------------------------------------------------
* Model "Rohr-14" (Type 709)
*
UNIT 61 TYPE 709 Rohr-14
*$UNIT_NAME Rohr-14
*$MODEL .\Hydronics Library (TESS)\Circular Pipe\Type709.tmf
*$POSITION 464 642
*$LAYER Main #
*$# PIPE
PARAMETERS 12
! 1 Inside diameter
! 2 Outside diameter
! 3 Pipe length
! 4 Pipe thermal conductivity
! 5 Fluid density
! 6 Fluid specific heat
! 7 Fluid thermal conductivity
! 8 Fluid viscosity
! 9 Initial fluid temperature
! 10 Number of nodes
! 11 Insulation thickness
! 12 Conductivity of insulation
2.5000000000000005E-02 2.8000000000000004E-02 2.0000000000000000E+00 1.0800000000000000E+03 9.9021000000000004E+02
4.1779999999999999E+00 2.0880000000000001E+00 2.1459999999999999E+00 1.0000000000000000E+01 1.0000000000000000E+00
3.0000000000000002E-02 1.2600000000000000E-01
INPUTS 4
! Gaskessel:Outlet fluid temperature ->Inlet temperature
! Gaskessel:Outlet fluid flowrate ->Inlet flow rate
! [unconnected] Outer surface convection coefficient
! [unconnected] Loss temperature for node
14,1 14,2 CONST CONST
*** INITIAL INPUT VALUES
1.0000000000000000E+01 1.0000000000000000E+02 1.0000000000000000E+01 1.0000000000000000E+01
*------------------------------------------------------------------------------
* Model "Rohr-15" (Type 709)
*
UNIT 62 TYPE 709 Rohr-15
*$UNIT_NAME Rohr-15
*$MODEL .\Hydronics Library (TESS)\Circular Pipe\Type709.tmf
*$POSITION 635 642
*$LAYER Main #
*$# PIPE
PARAMETERS 12
! 1 Inside diameter
! 2 Outside diameter
! 3 Pipe length
! 4 Pipe thermal conductivity
! 5 Fluid density
! 6 Fluid specific heat
! 7 Fluid thermal conductivity
! 8 Fluid viscosity
! 9 Initial fluid temperature
! 10 Number of nodes
! 11 Insulation thickness
! 12 Conductivity of insulation
2.5000000000000005E-02 2.8000000000000004E-02 2.0000000000000000E+00 1.0800000000000000E+03 9.9021000000000004E+02
4.1779999999999999E+00 2.0880000000000001E+00 2.1459999999999999E+00 1.0000000000000000E+01 1.0000000000000000E+00
3.0000000000000002E-02 1.2600000000000000E-01
INPUTS 4
! Pumpe-5:Outlet fluid temperature ->Inlet temperature
! Pumpe-5:Outlet flow rate ->Inlet flow rate
! [unconnected] Outer surface convection coefficient
! [unconnected] Loss temperature for node
15,1 15,2 CONST CONST
*** INITIAL INPUT VALUES
1.0000000000000000E+01 1.0000000000000000E+02 1.0000000000000000E+01 1.0000000000000000E+01
*------------------------------------------------------------------------------
* EQUATIONS "Einheiten-2"
*
EQUATIONS 2
rad_total_SI = [21,12]/3.6
rad_coll_SI = [21,18]/3.6
*$UNIT_NAME Einheiten-2
*$LAYER Main
*$POSITION 819 82
*------------------------------------------------------------------------------
* EQUATIONS "Einheiten-3"
*
EQUATIONS 5
Q_useful_coll_SI = [3,3]/3.6
Q_HX_SI = [8,5]/3.6
Q_BoilerReq_SI = [14,6]/3.6
Q_flow_2_SI = [2,10]/3.6
Q_to_flows_SI = [2,8]/3.6
*$UNIT_NAME Einheiten-3
*$LAYER Main
*$POSITION 841 477
*------------------------------------------------------------------------------
* Model "Ventil-2" (Type 11)
*
UNIT 65 TYPE 11 Ventil-2
*$UNIT_NAME Ventil-2
*$MODEL .\Hydronics\Flow Diverter\Other Fluids\Type11f.tmf
*$POSITION 710 482
*$LAYER Water Loop #
PARAMETERS 1
! 1 Controlled flow diverter mode
2.0000000000000000E+00
INPUTS 3
! Rohr-5:Outlet temperature ->Inlet temperature
! Rohr-5:Outlet flow rate ->Inlet flow rate
! Solarregler:Ventil_contrl ->Control signal
53,1 53,2 VENTIL_CONTRL
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 5.0000000000000000E-01
*------------------------------------------------------------------------------
* Model "Rohr-16" (Type 709)
*
UNIT 66 TYPE 709 Rohr-16
*$UNIT_NAME Rohr-16
*$MODEL .\Hydronics Library (TESS)\Circular Pipe\Type709.tmf
*$POSITION 578 482
*$LAYER Main #
*$# PIPE
PARAMETERS 12
! 1 Inside diameter
! 2 Outside diameter
! 3 Pipe length
! 4 Pipe thermal conductivity
! 5 Fluid density
! 6 Fluid specific heat
! 7 Fluid thermal conductivity
! 8 Fluid viscosity
! 9 Initial fluid temperature
! 10 Number of nodes
! 11 Insulation thickness
! 12 Conductivity of insulation
2.5000000000000005E-02 2.8000000000000004E-02 2.0000000000000000E+00 1.0800000000000000E+03 9.9021000000000004E+02
4.1779999999999999E+00 2.0880000000000001E+00 2.1459999999999999E+00 1.0000000000000000E+01 1.0000000000000000E+00
3.0000000000000002E-02 1.2600000000000000E-01
INPUTS 4
! Pufferspeicher:Temperature at outlet-1 ->Inlet temperature
! Pufferspeicher:Flow rate at outlet-1 ->Inlet flow rate
! [unconnected] Outer surface convection coefficient
! [unconnected] Loss temperature for node
2,1 2,2 CONST TRL CONST
*** INITIAL INPUT VALUES
1.0000000000000000E+01 1.0000000000000000E+02 1.0000000000000000E+01 1.0000000000000000E+01
*------------------------------------------------------------------------------
* Model "T-Stück-2" (Type 11)
*
UNIT 67 TYPE 11 T-Stück-2
*$UNIT_NAME T-Stück-2
*$MODEL .\Hydronics\Tee-Piece\Other Fluids\Type11h.tmf
*$POSITION 332 568
*$LAYER Water Loop #
PARAMETERS 1
! 1 Tee piece mode
1.0000000000000000E+00
INPUTS 4
! Rohr-17:Outlet temperature ->Temperature at inlet 1
! Rohr-17:Outlet flow rate ->Flow rate at inlet 1
! Rohr-18:Outlet temperature ->Temperature at inlet 2
! Rohr-18:Outlet flow rate ->Flow rate at inlet 2
68,1 68,2 69,1 69,2
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 2.0000000000000000E+01 1.0000000000000000E+02
*------------------------------------------------------------------------------
* Model "Rohr-17" (Type 709)
*
UNIT 68 TYPE 709 Rohr-17
*$UNIT_NAME Rohr-17
*$MODEL .\Hydronics Library (TESS)\Circular Pipe\Type709.tmf
*$POSITION 408 568
*$LAYER Main #
*$# PIPE
PARAMETERS 12
! 1 Inside diameter
! 2 Outside diameter
! 3 Pipe length
! 4 Pipe thermal conductivity
! 5 Fluid density
! 6 Fluid specific heat
! 7 Fluid thermal conductivity
! 8 Fluid viscosity
! 9 Initial fluid temperature
! 10 Number of nodes
! 11 Insulation thickness
! 12 Conductivity of insulation
2.5000000000000005E-02 2.8000000000000004E-02 2.0000000000000000E+00 1.0800000000000000E+03 9.9021000000000004E+02
4.1779999999999999E+00 2.0880000000000001E+00 2.1459999999999999E+00 1.0000000000000000E+01 1.0000000000000000E+00
3.0000000000000002E-02 1.2600000000000000E-01
INPUTS 4
! Pufferspeicher:Temperature at outlet-2 ->Inlet temperature
! Pufferspeicher:Flow rate at outlet-2 ->Inlet flow rate
! [unconnected] Outer surface convection coefficient
! [unconnected] Loss temperature for node
2,3 2,4 CONST CONST
*** INITIAL INPUT VALUES
1.0000000000000000E+01 1.0000000000000000E+02 1.0000000000000000E+01 1.0000000000000000E+01
*------------------------------------------------------------------------------
* Model "Rohr-18" (Type 709)
*
UNIT 69 TYPE 709 Rohr-18
*$UNIT_NAME Rohr-18
*$MODEL .\Hydronics Library (TESS)\Circular Pipe\Type709.tmf
*$POSITION 632 536
*$LAYER Main #
*$# PIPE
PARAMETERS 12
! 1 Inside diameter
! 2 Outside diameter
! 3 Pipe length
! 4 Pipe thermal conductivity
! 5 Fluid density
! 6 Fluid specific heat
! 7 Fluid thermal conductivity
! 8 Fluid viscosity
! 9 Initial fluid temperature
! 10 Number of nodes
! 11 Insulation thickness
! 12 Conductivity of insulation
2.5000000000000005E-02 2.8000000000000004E-02 2.0000000000000000E+00 1.0800000000000000E+03 9.9021000000000004E+02
4.1779999999999999E+00 2.0880000000000001E+00 2.1459999999999999E+00 1.0000000000000000E+01 1.0000000000000000E+00
3.0000000000000002E-02 1.2600000000000000E-01
INPUTS 4
! Ventil-2:Temperature at outlet 2 ->Inlet temperature
! Ventil-2:Flow rate at outlet 2 ->Inlet flow rate
! [unconnected] Outer surface convection coefficient
! [unconnected] Loss temperature for node
65,3 65,4 CONST CONST
*** INITIAL INPUT VALUES
1.0000000000000000E+01 1.0000000000000000E+02 1.0000000000000000E+01 1.0000000000000000E+01
*------------------------------------------------------------------------------
* Model "Ventil" (Type 11)
*
UNIT 70 TYPE 11 Ventil
*$UNIT_NAME Ventil
*$MODEL .\Hydronics\Flow Diverter\Other Fluids\Type11f.tmf
*$POSITION 417 493
*$LAYER Main #
PARAMETERS 1
! 1 Controlled flow diverter mode
2.0000000000000000E+00
INPUTS 3
! Rohr-8:Outlet temperature ->Inlet temperature
! Rohr-8:Outlet flow rate ->Inlet flow rate
! Solarregler:Ventil_contrl ->Control signal
55,1 55,2 VENTIL_CONTRL
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 5.0000000000000000E-01
*------------------------------------------------------------------------------
* Model "Rohr-19" (Type 709)
*
UNIT 71 TYPE 709 Rohr-19
*$UNIT_NAME Rohr-19
*$MODEL .\Hydronics Library (TESS)\Circular Pipe\Type709.tmf
*$POSITION 248 472
*$LAYER Main #
*$# PIPE
PARAMETERS 12
! 1 Inside diameter
! 2 Outside diameter
! 3 Pipe length
! 4 Pipe thermal conductivity
! 5 Fluid density
! 6 Fluid specific heat
! 7 Fluid thermal conductivity
! 8 Fluid viscosity
! 9 Initial fluid temperature
! 10 Number of nodes
! 11 Insulation thickness
! 12 Conductivity of insulation
2.5000000000000005E-02 2.8000000000000004E-02 2.0000000000000000E+00 1.0800000000000000E+03 9.9021000000000004E+02
4.1779999999999999E+00 2.0880000000000001E+00 2.1459999999999999E+00 1.0000000000000000E+01 1.0000000000000000E+00
3.0000000000000002E-02 1.2600000000000000E-01
INPUTS 4
! Type177ak:tgo ->Inlet temperature
! Type177ak:mgo ->Inlet flow rate
! [unconnected] Outer surface convection coefficient
! [unconnected] Loss temperature for node
23,1 23,2 CONST TRL CONST
*** INITIAL INPUT VALUES
1.0000000000000000E+01 1.0000000000000000E+02 1.0000000000000000E+01 1.0000000000000000E+01
*------------------------------------------------------------------------------
* Model "T-Stück" (Type 11)
*
UNIT 72 TYPE 11 T-Stück
*$UNIT_NAME T-Stück
*$MODEL .\Hydronics\Tee-Piece\Other Fluids\Type11h.tmf
*$POSITION 395 418
*$LAYER Main #
PARAMETERS 1
! 1 Tee piece mode
1.0000000000000000E+00
INPUTS 4
! Rohr-4:Outlet temperature ->Temperature at inlet 1
! Rohr-4:Outlet flow rate ->Flow rate at inlet 1
! Rohr-21:Outlet temperature ->Temperature at inlet 2
! Rohr-21:Outlet flow rate ->Flow rate at inlet 2
51,1 51,2 74,1 74,2
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 2.0000000000000000E+01 1.0000000000000000E+02
*------------------------------------------------------------------------------
* Model "Rohr-20" (Type 709)
*
UNIT 73 TYPE 709 Rohr-20
*$UNIT_NAME Rohr-20
*$MODEL .\Hydronics Library (TESS)\Circular Pipe\Type709.tmf
*$POSITION 440 386
*$LAYER Main #
*$# PIPE
PARAMETERS 12
! 1 Inside diameter
! 2 Outside diameter
! 3 Pipe length
! 4 Pipe thermal conductivity
! 5 Fluid density
! 6 Fluid specific heat
! 7 Fluid thermal conductivity
! 8 Fluid viscosity
! 9 Initial fluid temperature
! 10 Number of nodes
! 11 Insulation thickness
! 12 Conductivity of insulation
2.5000000000000005E-02 2.8000000000000004E-02 1.0000000000000000E+00 1.0800000000000000E+03 9.9021000000000004E+02
4.1779999999999999E+00 2.0880000000000001E+00 2.1459999999999999E+00 1.0000000000000000E+01 1.0000000000000000E+00
3.0000000000000002E-02 1.2600000000000000E-01
INPUTS 4
! T-Stück:Outlet temperature ->Inlet temperature
! T-Stück:Outlet flow rate ->Inlet flow rate
! [unconnected] Outer surface convection coefficient
! [unconnected] Loss temperature for node
72,1 72,2 CONST CONST
*** INITIAL INPUT VALUES
1.0000000000000000E+01 1.0000000000000000E+02 1.0000000000000000E+01 1.0000000000000000E+01
*------------------------------------------------------------------------------
* Model "Rohr-21" (Type 709)
*
UNIT 74 TYPE 709 Rohr-21
*$UNIT_NAME Rohr-21
*$MODEL .\Hydronics Library (TESS)\Circular Pipe\Type709.tmf
*$POSITION 386 450
*$LAYER Main #
*$# PIPE
PARAMETERS 12
! 1 Inside diameter
! 2 Outside diameter
! 3 Pipe length
! 4 Pipe thermal conductivity
! 5 Fluid density
! 6 Fluid specific heat
! 7 Fluid thermal conductivity
! 8 Fluid viscosity
! 9 Initial fluid temperature
! 10 Number of nodes
! 11 Insulation thickness
! 12 Conductivity of insulation
2.5000000000000005E-02 2.8000000000000004E-02 2.0000000000000000E+00 1.0800000000000000E+03 9.9021000000000004E+02
4.1779999999999999E+00 2.0880000000000001E+00 2.1459999999999999E+00 1.0000000000000000E+01 1.0000000000000000E+00
3.0000000000000002E-02 1.2600000000000000E-01
INPUTS 4
! Ventil:Temperature at outlet 2 ->Inlet temperature
! Ventil:Flow rate at outlet 2 ->Inlet flow rate
! [unconnected] Outer surface convection coefficient
! [unconnected] Loss temperature for node
70,3 70,4 CONST CONST
*** INITIAL INPUT VALUES
1.0000000000000000E+01 1.0000000000000000E+02 1.0000000000000000E+01 1.0000000000000000E+01
*------------------------------------------------------------------------------
* Model "Type65d" (Type 65)
*
UNIT 75 TYPE 65 Type65d
*$UNIT_NAME Type65d
*$MODEL .\Output\Online Plotter\Online Plotter Without File\Type65d.tmf
*$POSITION 67 125
*$LAYER Main #
PARAMETERS 12
! 1 Nb. of left-axis variables
! 2 Nb. of right-axis variables
! 3 Left axis minimum
! 4 Left axis maximum
! 5 Right axis minimum
! 6 Right axis maximum
! 7 Number of plots per simulation
! 8 X-axis gridpoints
! 9 Shut off Online w/o removing
! 10 Logical unit for output file
! 11 Output file units
! 12 Output file delimiter
4.0000000000000000E+00 3.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+03 0.0000000000000000E+00
1.0000000000000000E+03 1.0000000000000000E+00 1.2000000000000000E+01 0.0000000000000000E+00 -1.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00
INPUTS 7
! Rohr-11:Outlet temperature ->Left axis variable-1
! Rohr-9:Outlet temperature ->Left axis variable-2
! Evap_in:t_Ei ->Left axis variable-3
! Type177ak:teo ->Left axis variable-4
! Solarregler:Ventil_contrl ->Right axis variable-1
! Solarregler:Pump2_signal ->Right axis variable-2
! Solarregler:Pump3_signal ->Right axis variable-3
56,1 54,1 T_EI 23,3 VENTIL_CONTRL
PUMP2_SIGNAL PUMP3_SIGNAL
*** INITIAL INPUT VALUES
t_ACi t_Gi t_Ei teo Ventil_contrl
Pump2_signal Pump3_signal
LABELS 3
Temperaturen [°C]
[-]
Ergebnisse"
*------------------------------------------------------------------------------
* Model "System_Printer" (Type 25)
*
UNIT 76 TYPE 25 System_Printer
*$UNIT_NAME System_Printer
*$MODEL \Program Files (x86)\Trnsys16_1\Studio\lib\System_Output\Type25a.tmf
*$POSITION 382 744
*$LAYER OutputSystem #
PARAMETERS 10
! 1 Printing interval
! 2 Start time
! 3 Stop time
! 4 Logical unit
! 5 Units printing mode
! 6 Relative or absolute start time
! 7 Overwrite or Append
! 8 Print header
! 9 Delimiter
! 10 Print labels
1.6666666000000004E-02 3.7300000000000000E+03 3.7380000000000000E+03 3.3000000000000000E+01 2.0000000000000000E+00
0.0000000000000000E+00 -1.0000000000000000E+00 -1.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00
INPUTS 5
! Rohr-9:Outlet temperature ->Input to be printed-1
! Type177ak:teo ->Input to be printed-2
! Rohr-11:Outlet temperature ->Input to be printed-3
! Wetter:Ambient temperature ->Input to be printed-4
! Einheiten-2:rad_total_SI ->Input to be printed-5
54,1 23,3 56,1 21,1 RAD_TOTAL_SI
*** INITIAL INPUT VALUES
t_Gi t_Eo t_ACi t_Umg ebung rad_total_SI
*** External files
ASSIGN C:\Users\Florian Weiß\Documents\My Dropbox\Modul_Bachelorarbeit\Literatur\USB-Stick von Annett\TRNSYS\Sommer\AKA Sommer Flachkollektor Berlin Direktbetrieb geregelt.dat 33
*|? Which file should contain the printed results? You can use the deck filename by entering "***", e.g. "***.out", or "***.dat" |1000
*------------------------------------------------------------------------------
END
TRANSIENT SIMULATION STARTING AT TIME = 3.7300000000000000E+03
STOPPING AT TIME = 3.7380000000000000E+03
TIMESTEP = 1 / 60
DIFFERENTIAL EQUATION ERROR TOLERANCE = 1.0000000000000002E-02
ALGEBRAIC CONVERGENCE TOLERANCE = 1.0000000000000002E-02
DIFFERENTIAL EQUATIONS SOLVED BY MODIFIED EULER
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : The following Types were loaded from TRNDll.dll: Type1, Type110, Type5, Type65, Type109, Type62, Type14, Type22, Type2, Type11, Type25
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "type127.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "Type157_demo_release.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : The following Types were loaded from "Type177.dll": Type177, Type251
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "type210.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 199 : TRNSYS found at least one user DLL in the UserLib directory. (Note: Only DLL's including Types that are used in the simulation are loaded)
Reported information : 1 user DLL was loaded after searching in "C:\Program Files\Trnsys16_1\UserLib\ReleaseDLLs"
*** Fatal Error at time : 3730.000000
Generated by Unit : 14
Generated by Type : 700
TRNSYS Message 105 : A TYPE was called in the TRNSYS input file but was either not linked into trndll.dll or was not found in an external dll. A dummy subroutine was called in its place. Please link the TYPE or remove it from the input file
Reported information : Not available
==========================================================================================
TYPE109 TIME REPORT: (for debugging purpose)
------------------------------------------------------------------------------------------
time_report_unit: 6
time_filter: .0000E+00 [ms]
==========================================================================================
Level0 Level1 Level2 Level3 Level4 Counter DTime[ms] TTime[ms]
==========================================================================================
zwischenzeit 1 : 0.000000000000000E+000
zwischenzeit 2 : 0.000000000000000E+000
zwischenzeit 3 : 0.000000000000000E+000
zwischenzeit 4 : 0.000000000000000E+000
zwischenzeit 5 : 0.000000000000000E+000
zwischenzeit 6 : 0.000000000000000E+000
zwischenzeit 7 : 0.000000000000000E+000
zwischenzeit 8 : 0.000000000000000E+000
zwischenzeit 9 : 0.000000000000000E+000
zwischenzeit 10 : 0.000000000000000E+000
itest : 0
Summe : 0.000000000000000E+000
*********************************************************************************************************
The Following UNIT Numbers, TYPE Numbers, and Logical Units Were Used in the Supplied TRNSYS Input File:
2 1 4
3 2 6
5 5 9
8 11 33
9 14 44
14 22 45
15 25 46
19 62 47
21 65
22 109
23 110
27 177
28 251
29 534
31 700
34 709
40
42
43
44
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
65
66
67
68
69
70
71
72
73
74
75
76
*********************************************************************************************************
Total TRNSYS Calculation Time: 4.3900 Seconds
-------------- next part --------------
A non-text attachment was scrubbed...
Name: TRNSYS.rar
Type: application/octet-stream
Size: 1844634 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130215/fac545fd/attachment-0005.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Screenshot#1.png
Type: image/png
Size: 276508 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130215/fac545fd/attachment-0005.png>