[TRNSYS-users] problemwith solar fraction

[Talib Ahmadu]

Dear trnsys users,
I have modelled a solar absorption cooling system supported by an auxilliary heater. The system seems to run ok but the solar fraction gets higher with decreasing collector area, which is not ideal. I connected the fluid output from the collector to the auxilliary heater input then tried to control the heat input to the fluid. There seems to be a problem, I'ld appreciate if anyone has any suggestions. Thanks. I've attached the files.
Talib.
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130214/2dc62f27/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: BuildingProject17.tpf
Type: application/octet-stream
Size: 499564 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130214/2dc62f27/attachment-0004.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: BuildingProject17.bld
Type: application/octet-stream
Size: 34376 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130214/2dc62f27/attachment-0005.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: BuildingProject17.bui
Type: application/octet-stream
Size: 37980 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130214/2dc62f27/attachment-0006.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: BuildingProject17.dck
Type: application/octet-stream
Size: 36163 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130214/2dc62f27/attachment-0007.obj>