[TRNSYS-users] Type 557 (TESS)

[Humberto Quintana]

Hi,

I have made a proforma that enables extra outputs available from Type 557:

OUT(9)=TUTMED(0) OUT(10)=TUTMED(1)  !Center
OUT(11)= TUTMED(NRLOC) !Border
...
OUT(9+NRLOC)= TUTMED(2)

You have to be careful and make sure you understand what they 
represent, though.

If you are interested, please contact me off-list and I will send you 
the proforma.

Best regards,

Humberto Quintana

>
>
> From: trnsys-users-bounces at cae.wisc.edu
> [mailto:trnsys-users-bounces at cae.wisc.edu] On Behalf Of Flynn Ciaran
> Sent: Friday, December 07, 2012 04:42
> To: Felix Pag; trnsys-users at cae.wisc.edu
> Subject: Re: [TRNSYS-users] Type 557 (TESS)
>
>
>
> Hi Felix and trnsys-users,
>
>
>
> I am also using type 557a and would like to get more temperatures than just
> the average storage temperature (output 3), however I am also short of
> ideas... I’ve looked at many other threads but have not come across a
> solution..
>
>
>
> I took a look at the source code for Type557, tried to modify the line
> “OUT(9)=TUTMED(0)[
] OUT(10)= TUTMED(1)” with “OUT(9)=TUTMED(1)[
]
> OUT(10)=TUTMED(0)” but this didn’t seem to change anything
 The file
> Type557.exe in the Plug-in folder might play an important part, making it
> difficult to change code like this (?)
>
>
>
> If anyone knows how to get the temperatures at all nodes (parameter 7 *
> parameter 8) as outputs that would be great!
>
>
>
> Thanks,
>
> Ciarán
>
>
>
>
>
> From: trnsys-users-bounces at cae.wisc.edu
> [mailto:trnsys-users-bounces at cae.wisc.edu] On Behalf Of Felix Pag
> Sent: 4. joulukuuta 2012 18:20
> To: trnsys-users at cae.wisc.edu
> Subject: [TRNSYS-users] Type 557 (TESS)
>
>
>
> Hello,
>
> I am trying to simulate a vertical U-Tube heat exchanger with the TESS Model
> Type 557a. For the validation and comparison with another simulation it
> would be really helpful to get the temperature field around the borehole as
> output. Looking at the Fortran Code, I noticed that the average soil
> temperature is written in OUT(9) and the following OUT-fields.
> I wondered how I could get them into Simulation Studio. I tried to change
> the Proforma and add the missing lines. But then I got an error like
>
>
> "The listed input referenced an output number beyond the allocated outputs
> for the connected type."
>
> I had a look in the Trnvdst.inc file and thought that I could solve the
> problem by setting the Parameter "MAXSPE  = Maximum number of specified
> output ground temperatures" from 10 to a higher value and then recompile the
> dll but that doesn't solve the problem.
>
> The error has already been reported but only in another context.
>
> Has anyone any idea how to deal this or some experiences with simulations of
> type 557?
>
> Thank you in advance
> Felix
>
>