[TRNSYS-users] rebuilding TRNDll with IVF 10.1 and MVS 2005

[David BRADLEY]

Farah,
   Not that I am aware of. I've been using IVF 11. Some of my colleagues 
are using v12 (Composer XE). If you are using Trnsys16, there may be 
some problems associated with the IVF compiler and the obj files 
provided for linking Type56. If you are using Trnsys17, there shouldn't 
be any issues there. if you can phyically see the newly rebuilt 
TRNDll.dll in the ..\TrnsysXX\Exe directory, check its size. If a DLL 
gets to be too big then it can't be loaded into phsyical memory and you 
get the "did not find TRNDLL" message.
Kind regards,
  David


On 12/10/2012 07:01, Farah Gammoh wrote:
> Hello,
> I have the code and libraries of thermophysical properties of some 
> refrigerants (FluidProp) and have tried to rebuild TRNDll using IVF 
> 10.1 and MVS 2005 according to the instructions in the programmer's 
> guide for IVF 9.0 and MVS 2003. After 'successfull' linking, TRNSYS 
> fails to find TRNDll.DLL when running a simulation.
> Are there things I have to take into consideration while rebuilding 
> the TRNDll with the new codes from FluidProp using the newer versions 
> of IVF and MVS?
> Thanks in advance.
> Best regards,
> Farah
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20121210/d0c9ff39/attachment-0005.htm>