[TRNSYS-users] Hc when using the simple model

[Marion Hiller]

HI Nicolas,

 

No, you have to enter the combined heat transfer coefficient for the
simple mode. Unfotunately, the text daoen’t change automatically.

Please, have in mind that the radiation mode influences on the heat
transfer method inside a zone.

 

Marion

 

 

 

Dipl.-Ing. Marion Hiller 
TRANSSOLAR: KlimaEngineering - Technologien für energieeffizientes Bauen
und Nutzerkomfort in Gebäude 
Munich - New York - Stuttgart + 49.711.67976.0 

Transsolar Energietechnik GmbH, Curiestrasse 2, 70563 Stuttgart 
Amtsgericht Stuttgart - HRB 23347, Steuernummer 99073/00911, USt-IdNr.:
DE152272639

Geschäftsführer: Dipl.Ing. Matthias Schuler, Dipl.Ing. Thomas Auer,
Dipl.Phys. Stefan Holst, Prof. Dipl.-Ing. Bleicher 

 

 

  _____  

Von: Nicolas Heijmans [mailto:nicolas.heijmans at bbri.be] 
Gesendet: Freitag, 7. Dezember 2012 12:56
An: trnsys-users at cae.wisc.edu
Betreff: [TRNSYS-users] Hc when using the simple model

 

Hello,

 

I ask, just to be sure.

 

If I use the "simple model" (combined hc and hr), the value to give in
the wall properties remains the convective heat transfer coefficient and
the radiative heat transfer coefficient is added by TRNSYS ?

 

Thanks,

 

Nicolas

 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20121210/db3f487a/attachment-0001.htm>