[TRNSYS-users] Watersource heat pump

[David BRADLEY]

Rajaa,
   Type557 is a model of the borefield. There are numerous heat pump 
models. For a water source heat pump with air on the load side, use 
Type919 in Trnsys17 (also in the GHP Library). For a single-stage 
water-to-water heatpump use Type927. For a 2-stage water to water heat 
pump use Type1227.

   For the heating network, I assume that you are speaking about a hot 
water loop? Components to model pipes are in the standard and TESS 
Hydronics libraries. You will find a number of delivery devices (fan 
coils, radiators, etc.) in the TESS HVAC library.
Regards,
  David


On 12/7/2012 10:20, Rajaa Badaoui wrote:
> Hello everybody,
>
> I have a question concerning ground watersource heat pump . I can't 
> find which type i can use to model a ground watersource heat pump, the 
> type 557a/b does not concern heat pump when the source is water.
> I have the same problem to model a heating network, is there a trnsys 
> type to model it?
> Please can you help me to find the appropriate type
>
> Thank you in advance,
>
> Rajaa.
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20121207/412da6c7/attachment-0001.htm>