[TRNSYS-users] Type4a and Type56

[David BRADLEY]

Dear Wojciech,
   Once you have created the active layer in your Type56 zone you need 
to specify that its inlet mass flow rate and inlet temperature are 
inputs to the Type56 model. You'll also need to create a new output in 
Type56 for the temperature of the liquid leaving the active layer (hint: 
it is a surface output in the corresponding zone). Once you have saved 
those changes in TRNBuild, exit back to the Simulation Studio, right 
click on the building and select "unpdate building variable list" from 
the context menu. You should now have the links that you need between 
Type4 and Type56.
Regards,
  David



On 11/29/2012 02:40, Malik Wojciech wrote:
>
> Hello All,
>
> I am trying to simulate a storage tank Type4a for domestic hot water 
> (heated by the air-water heat pump) which is connected to the building 
> Type56 (active layer).  I have a problem with connection of those two 
> components especially with the return from the active layer to the tank.
>
> Can anyone advise me  how can I create the new connections between 
> Type4a and building in order to create proper circuit?
>
> I will appreciate any kind of help.
>
> Sincerely
>
> Wojciech Malik
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20121203/b51cc4c1/attachment-0001.htm>