[TRNSYS-users] Problem with using Linear parabolic concentarator

[mohammad abdunnabi]

Dear TRNSYS Users

I'm having a PROBLEM with the using of Linear parabolic concentarator, the 
outlet 

tempertaure is always very high up to the max. outlet temperature that you set 
in the input parameter (no. 6). I have changed the area to the minimum ,the 
concentartion ratio, and also flow rate but without any effect (still the outlet 

tempertaure very high). I would be very grateful, if any one have time and can 
check the attached file, and let me where is my mistake 

Many thanks in advance

 Dr. Mohammad Abdunnabi
Head of Thermal Energy conversion Department
Center for Solar Energy Research and Studies (CSERS) 


Tripoli-Libya
P.O.Box: 12932
Tel.: +218 21 3699323
Fax.: +218 21 3699322
Office Phone: +218 21 7201993
Mobile Phone: +218 92 2256067 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: CSP8.tpf
Type: application/octet-stream
Size: 182771 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110516/3f1b3e2a/attachment-0010.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: CSP8.dck
Type: application/octet-stream
Size: 10597 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110516/3f1b3e2a/attachment-0011.obj>