[Equest-users] Layer Construction Error: No heat capacity

[Devin Rohan]

It was an error.  I read into it a little more and eQUEST says you can't
have all resistance layers only.  One of them has to be selected from the
Library of components.

On Thu, Jun 30, 2011 at 10:12 PM, Carol Gardner <cmg750 at gmail.com> wrote:

> Is it an error or a warning? If it's just a warning then you are okay
> because you have what you want.
>
>
> On Thu, Jun 30, 2011 at 5:55 PM, Devin Rohan <drohan at purdue.edu> wrote:
>
>> I'm trying to define a ceiling layer as be "resistance only." However,
>> when I generate the .BDL, I get an error that says "WALL has no heat
>> capacity.  U-VALUE used." I don't want to add capacity to this layer.  Is
>> there any way around this?  Thanks
>>
>>
>> --
>> Devin M. Rohan, LEED Green Associate
>> Purdue University
>> Civil/Architectural Engineering
>> drohan at purdue.edu
>>
>> _______________________________________________
>> Equest-users mailing list
>> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>> To unsubscribe from this mailing list send  a blank message to
>> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>>
>>
>
>
> --
> Carol Gardner PE
>



-- 
Devin M. Rohan, LEED Green Associate
Purdue University
Civil/Architectural Engineering
drohan at purdue.edu
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110630/bc0cefd9/attachment.htm>