[Equest-users] Layer Construction Error: No heat capacity

[Carol Gardner]

Is it an error or a warning? If it's just a warning then you are okay
because you have what you want.


On Thu, Jun 30, 2011 at 5:55 PM, Devin Rohan <drohan at purdue.edu> wrote:

> I'm trying to define a ceiling layer as be "resistance only." However, when
> I generate the .BDL, I get an error that says "WALL has no heat capacity.
>  U-VALUE used." I don't want to add capacity to this layer.  Is there any
> way around this?  Thanks
>
>
> --
> Devin M. Rohan, LEED Green Associate
> Purdue University
> Civil/Architectural Engineering
> drohan at purdue.edu
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 
Carol Gardner PE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110630/fdb7ee32/attachment.htm>