[Equest-users] Actual vs model- utiltiys

[mike steadman]

Ok, 
here is my stupid question-I deleted my equest box with some great answers

Some one sent me this wonderful spreadsheet about utilitys-thank you
yet  I am cloudy on what the answer really means for inputting actual utilty use into my model.

Is that even done with equest and if so, where in the process can you do it, Schematic wizard.? DD wizard?
I see rates for block, demand , yet nothing for inputting the exact amount of therms or KWH in each month with usage numbers, I have built my model and saved in DD mode so editing the utilty use from the component tree seems to not work?

My memory with this attached spreadsheet - I would run my building simulation and save to a sheet like this and then revise to current usage and somehow upload back into my model. WoW.!!
Can anybody help with that process
Thanks in advance

Mike S

Energy Manager
ABI Mechanical
Traverse City Michigan 49685
231-943-4114 ext 250
msteadman at abimechanical.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110629/a8bc3670/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 4 - 181-185 Bill Matching vs. eQuest.xls
Type: application/octet-stream
Size: 156160 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110629/a8bc3670/attachment.obj>