[Equest-users] How to simulate a building with a unregular shape like pyramid?

[Paul Brooks]

I am modeling a building that is oval, with each floor area increasing as you go up......imagine a rose that has not bloomed, that is what the building looks like.

I ended up making each floor to be the SF that it is, and then stacked the shells.  In your case, it will look like a pyramid that has steps to get to the top.  Shading will have to be used to get the solar gain correct for me, for you, it will be an issue.  I do not think you can tilt the exterior walls.

Good luck!




________________________________
From: Lisa Zhang <lisazhangtj at gmail.com>
To: equest-users at lists.onebuilding.org
Sent: Thu, March 11, 2010 2:06:54 AM
Subject: [Equest-users] How to simulate a building with a unregular shape like pyramid?

Dear all,

      I met a project with the configulation quite unregular. It has
lean wall just like pyramid. How can I build it with equest? Have you
ever met with such problem?

      Thank you very much!


Lisa
_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100311/a3767945/attachment.htm>