[Equest-users] Roof Ridge Line Orientation

[Keith Curtis]

Dennis,

This is not obvious, but really easy.  Go to your roof diagram with the coordinates.  Move coordinate 1 to 2, 2 to 3, 3 to 4, and 4 to 1.
Close and reopen and you should find your roof line rotated 90° (I'm assuming you didn't really mean 180°).


Keith Curtis
Senior Mechanical Engineer

[cid:image001.jpg at 01CABBAF.7C06ECE0]

http://www.emcengineers.com/


Making buildings work. Better.    Since 1976




Alpharetta, GA 30022


From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Dennis Hunt
Sent: Thursday, March 04, 2010 3:10 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Roof Ridge Line Orientation

eQUEST users,

The ridge line orientation, of the pitched roof, in my model needs to be rotated 180 degrees. The ridge line needs to run in a north-south direction not the east-west direction that eQUEST wizard employed.
How do I change the ridge line orientation? A copy of the .pd2 is attached.

The model was developed in eQUEST 3.63 with three shells. Two of the roofs are at the same elevation and the third roof is at a higher elevation. A .pdf file of the building elevations is attached.

Thanks for any help,

Dennis Hunt
503-246-5241
dhunt at summitbe.com
http://www.summitbe.com
Summit Building Engineering


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100304/a4f9579f/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 2573 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100304/a4f9579f/attachment.jpg>