[Equest-users] Roof Ridge Line Orientation
Dennis Hunt
dhunt at summitbe.com
Thu Mar 4 12:09:52 PST 2010
eQUEST users,
The ridge line orientation, of the pitched roof, in my model needs to be
rotated 180 degrees. The ridge line needs to run in a north-south direction
not the east-west direction that eQUEST wizard employed.
How do I change the ridge line orientation? A copy of the .pd2 is attached.
The model was developed in eQUEST 3.63 with three shells. Two of the roofs
are at the same elevation and the third roof is at a higher elevation. A
.pdf file of the building elevations is attached.
Thanks for any help,
Dennis Hunt
503-246-5241
dhunt at summitbe.com
http://www.summitbe.com
Summit Building Engineering
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100304/0d8823df/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: AFRC OMS Bldg Baseline test.pd2
Type: application/octet-stream
Size: 28214 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100304/0d8823df/attachment.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Vancouver OMS Bldg 2 Elevations.pdf
Type: application/pdf
Size: 194893 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100304/0d8823df/attachment.pdf>
More information about the Equest-users
mailing list