[Equest-users] Modeling Water to Water Heat Pumps
Anthony Hardman
Anthony at geoenergyservices.com
Mon Mar 1 12:59:42 PST 2010
Not sure if somebody answered this yet or not. The short answer is no, but
hopefully
<http://apps1.eere.energy.gov/geothermal/projects/projects.cfm/ProjectID=111
> thatll change soon?
Anthony Hardman
Mechancial Engineer
LEED AP
Geo-Energy Services
14250 E Easter Pl, STE C
Centennial, CO 80112
303-531-5292 v
303-805-3563 f
720-273-9973 c
www.GeoEnergyServices.com
From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Daniel
Deese
Sent: Monday, February 22, 2010 3:09 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Modeling Water to Water Heat Pumps
Hi All,
We're working on a lab project that will have a 100% outside air control
strategy, and therefore significant cooling and reheat loads. We'll be
using pretty standard chillers to provide chilled water, and rejecting the
heat to a common ground loop. For heating, we'll be using water to water
heat pumps to remove heat from the common ground loop and put it into the
heating water loop (for pre- and re-heat). And the third component will be
a ground loop heat exchanger (vertical wells) to act as the heat sink/source
for the heating and cooling extremes.
My question really is this: Can eQuest model a water to water heat
pump? I found something in the DOE-2.2 volume dictionary about a
Loop-to-Loop heat pump, but it doesn't give me any .inp commands or
variables, so I'm a little scared to just throw in a loop to loop heat pump.
In addition to my fears, I don't see a "heat pump" heading under which to
put it.
If anyone has tried this before and has any insight, it would be greatly
appreciated. thanks.
daniel
Daniel I. Deese, EI| CRB Consulting Engineers |
1255 Crescent Green, Suite 350 | Cary, NC 27518 |
P: 919-852-5443 | F: 919-852-5454 | X: 4543
Email: <mailto:daniel.deese at crbusa.com> daniel.deese at crbusa.com
____________________________________________________________________________
____________
This document may contain confidential information and is intended for use
by the addressee only. If you are not
the intended recipient, please do not transmit, copy, disclose, or utilize
this communication in any manner. If you
received this message in error, please notify the sender immediately and
delete this message.
ü Please consider the environment before printing this email.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100301/70f22303/attachment.htm>
More information about the Equest-users
mailing list