[Equest-users] Difficulty merging spaces

[Carol Gardner]

Dan,

I'm not sure why you are trying to manage unmet loads. I would suggest that
you do all you can to meet the loads and don't worry about it further. Since
your "spaces" are really at an equilibrium temperature once you call the
wall an air wall that should suffice.

Regards,
Carol

On Mon, Jul 26, 2010 at 8:29 AM, Dan Coutin <CoutinD at erdmananthony.com>wrote:

>  On occasion I have mapped a single physical space as two adjacent spaces.
> This is convenient when, for example, the ceiling heights vary
> considerably. I have been unable to merge the two spaces – the result
> being seen as different unmet loads in each space. I have tried turning
> the wall to an air wall with very high U value to no avail. I have
> sometimes been able to manage unmet loads by fixing space air flow, but
> this is not ideal, especially when trying to auto-size to fulfill modelingprotocol. Can
> anyone please guide me on this.
>
>  Thanks
>
> *******Dan Coutin*********
>
> Erdman Anthony
> Troy, New York
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 
Carol Gardner PE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100727/1a266864/attachment.htm>