[Equest-users] Difficulty merging spaces

[Dan Coutin]

On occasion I have mapped a single physical space as two adjacent
spaces. This is convenient when, for example, the ceiling heights vary
considerably. I have been unable to merge the two spaces - the result
being seen as different unmet loads in each space. I have tried turning
the wall to an air wall with very high U value to no avail. I have
sometimes been able to manage unmet loads by fixing space air flow, but
this is not ideal, especially when trying to auto-size to fulfill
modeling protocol. Can anyone please guide me on this.
 Thanks
Dan Coutin
Erdman Anthony 
Troy, New York 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100726/9ff88ed9/attachment.htm>