[Equest-users] Modeling different floor area

[Kugler, Nicholas]

You can create separate "shells" for each footprint that is different. You need to be in the DD Wizard and create new shells as indicated below:
[cid:image003.jpg at 01CA8F68.ADF18DA0]
Nick Kugler, LEED AP
Mechanical Engineering
From: Jack Vithayapun [mailto:jvithayapun at fs.fed.us]
Sent: Wednesday, January 06, 2010 11:00 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Modeling different floor area


Hi,
I have a 3 story building, 2 of which are above grade and have the same footprint, 1 is below grade and a different footprint.

I have modeled it in Equest using the wizard and all 3 floors are currently the same footprint size. Is there a way I can 'shrink' the
basement floor to make it a smaller footprint then the floors above it?

Thanks
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100107/41dbd837/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.jpg
Type: image/jpeg
Size: 21118 bytes
Desc: image003.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100107/41dbd837/attachment.jpg>