[Equest-users] Modeling different floor area

[Bishop, Bill]

Jack,
Leave out the below grade floor for the building shell on wizard screen
1. Then create a new shell "immediately below" the other shell (as
selected on screen 1). Alternatively, you can "Specify Exact
Coordinates" such as (0,0,-12). This shell will have 0 above grade and 1
below grade floor. Change the footprint on screen 2.
Regards,
Bill
 
William Bishop, EIT, LEED(r) AP | Pathfinder Engineers & Architects LLP
Mechanical Engineer
 
134 South Fitzhugh Street
Rochester, NY 14608
T: (585) 325-6004 Ext. 114
F: (585) 325-6005
wbishop at pathfinder-ea.com
www.pathfinder-ea.com
P Please strive to live sustainably.         
________________________________

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Jack
Vithayapun
Sent: Wednesday, January 06, 2010 11:00 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Modeling different floor area
 

Hi, 
I have a 3 story building, 2 of which are above grade and have the same
footprint, 1 is below grade and a different footprint. 

I have modeled it in Equest using the wizard and all 3 floors are
currently the same footprint size. Is there a way I can 'shrink' the 
basement floor to make it a smaller footprint then the floors above it? 

Thanks 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100106/fe50a6e1/attachment.htm>