[Equest-users] Savings By Design/Title 24 Compliance

Kevin Madison kevinjm5000 at yahoo.com
Fri Apr 23 20:02:37 PDT 2010


Cassie -
We are aware of the problem you are having with the FCUs, and there 
isn't a fix for it at this time. For now, we have been advising people 
to use the SZRH system with one zone per system. This problem is fixed 
in the version we just submitted to the CEC for 2008 Title 24. We are 
expecting approval in the next couple of months. Sorry for the hassle.

Kevin Madison


On 4/23/2010 6:13 PM, Cassie Waddell wrote:
>
> Hi,
>
> I'm looking for someone with experience using the Savings By Design or 
> Title 24 compliance engines within eQuest. It is my understanding that 
> only version 3.6 has been approved by the CEC, so this is the version 
> that I have been attempting to use. Some of the models were initially 
> created in version 3.63b. When I try to open the models in the old 
> version using the .inp file all of the walls disappear. Does anyone 
> know of a quick fix for this?
>
> Also, regarding the compliance engine, many of the spaces are served 
> by FCUs. The compliance engine requires a system-level supply airflow 
> input (Design cfm), which is not an input option for this type of 
> system within eQuest. I have tried to specify the airflow at the zone 
> level but still get the error. Does anyone know a work-around for 
> this? I am a rookie at dealing with the compliance engine so would 
> appreciate any additional tips moving forward.
>
> Thanks a lot,
>
> ________________________________
> Cassie Waddell
>
> Mechanical Engineer, LEED® AP
>
> Arup
> 560 Mission St, Seventh Floor
>
> San Francisco CA 94105
> tel: 1 415 946 1660
> fax: 1 415 957 9096
> cassie.waddell at arup.com <mailto:cassie.waddell at arup.com>
> www.arup.com
>
> ____________________________________________________________
> Electronic mail messages entering and leaving Arup  business
> systems are scanned for acceptability of content and viruses
>    
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>    
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100423/5aad975f/attachment.htm>


More information about the Equest-users mailing list