[Equest-users] Thermostat Setting

[Susan F]

Unfortunately due to the sensitive nature of the project I cannot send the
files.  I have checked and my heating/cooling schedules are assigned to the
right locations.

Could it be related to the design temperatures I have indicated for each
zone?  The tstat schedules are as I have stated below but I have the design
temperatures at 74 cooling and 72 heating.  The load temperature (in the
space definition) is 70.  My throttling range is 2.  Would any of this cause
problems?

On Thu, Apr 22, 2010 at 11:50 AM, Carol Gardner <cmg750 at gmail.com> wrote:

> Susan,
>
> While in detailed data edit go onto one of your thermal zone spreadsheets
> to look at your schedules. You will be able to see them easily from there.
> Make sure you haven't accidentally put your heating schedule in where your
> cooling schedule should be. If this doesn't work zip up your .inp and .pd2
> files and send them to us.
>
> Good luck,
> Carol
>
> On Thu, Apr 22, 2010 at 6:11 AM, Susan F <modelsenergy at gmail.com> wrote:
>
>> I have a model that does not seem to be switching the thermostat between
>> heating and cooling.  When I output the hourly data for the Zone Thermostat
>> Setting it seems to always be the heating setpoints (70 occupied and 64
>> unoccupied).  Any idea why this wouldn't be changing over to cooling
>> setpoints (75 occupied and 82 unoccupied) during the warmer months?
>>
>> Thanks in advance.
>>
>> _______________________________________________
>> Equest-users mailing list
>> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>> To unsubscribe from this mailing list send  a blank message to
>> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100422/14779b9a/attachment.htm>