[Equest-users] Thermostat Setting

Carol Gardner cmg750 at gmail.com
Thu Apr 22 08:50:31 PDT 2010


Susan,

While in detailed data edit go onto one of your thermal zone spreadsheets to
look at your schedules. You will be able to see them easily from there. Make
sure you haven't accidentally put your heating schedule in where your
cooling schedule should be. If this doesn't work zip up your .inp and .pd2
files and send them to us.

Good luck,
Carol

On Thu, Apr 22, 2010 at 6:11 AM, Susan F <modelsenergy at gmail.com> wrote:

> I have a model that does not seem to be switching the thermostat between
> heating and cooling.  When I output the hourly data for the Zone Thermostat
> Setting it seems to always be the heating setpoints (70 occupied and 64
> unoccupied).  Any idea why this wouldn't be changing over to cooling
> setpoints (75 occupied and 82 unoccupied) during the warmer months?
>
> Thanks in advance.
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100422/3b0c5fba/attachment.htm>


More information about the Equest-users mailing list