[Equest-users] Energy recovery ventilation

[Chris Jones]

Personally, I would model Unit Ventilators as SZRH systems with hot 
and chilled water coils, fan power as per the Unit Ventilator shop 
drawings.  Then you can specify the heat recovery type and effectiveness.

At 08:38 AM 4/16/2010, Rob Hudson wrote:
>I am modeling a school building with small "unit ventilators" that 
>have hot water and chilled water coils, (i'm modeling as fan coil 
>units in equest).  My problem is that these units have a small ERV 
>and equest doesn't allow fan coils to have them.  If anyone has a 
>bright solution or tips that would be great.
>my plan as of now is to create a dummy system that will feed OA to 
>the fan coil units and put the ERV on this dummy system.
>
>Thanks,
>
>--
>Rob Hudson


Chris Jones
14 Oneida Avenue
Toronto, ON M5J 2E3.
Tel.  416-203-7465
Fax. 416-946-1005