[Equest-users] daily occupancy schedules

[Steven Savich]

Stephen,

 

Luckily, this is pretty easy, just a bit time consuming.

 

When you are finished with ALL work in the Wizard, you can switch to
detailed data edit mode, create a new day schedule for each system that
applies (cooling, heating, fan, occupancy, plug load, lighting, etc) that
includes the 6-8 pm occupancy time.  Once you've finished all of the new
schedules, reference them for the applicable days through the appropriate
week schedule dialogue boxes.

 

If you're comfortable with working in the .inp file, it can be substantially
faster to create the new schedules directly in the file with a text editor.
Just remember to save a backup copy of the .inp and .pdf files in case you
make a misstep.  (and yes, I learned that the hard way)

 

Good luck,

Steven

 

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Stephen
Sorensen
Sent: Tuesday, April 13, 2010 1:10 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] daily occupancy schedules

 

Hi everyone,

 

Does e-Quest allow for multiple usage schedules per day. For example, a
particular religious worship building is primarily used on Sundays, so, that
schedule is easy to enter, however, during the week, the building is used
every day from 7am-9am. The difficult part comes from the fact that two
nights a week it is used from 6p-8p. how can I get e-quest to show this
schedule irregularity?

 

Stephen Sorensen

Hansen Engineering

Friendsville, PA

P: 570-553-4284

F: 570-553-0234

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100413/0566a5ff/attachment.htm>