[Equest-users] SubMeters in Equest

[Thomas Serra]

Check the PS-E and PS-F reports.  These have the master meters and
sub-meters broken out by month.  I will sometimes create an additional
utility meter to avoid confusing the LEED review team when they look at the
BEPS reports.  Of course this may throw off any block type or demand type
utility rates.

 

Thomas Serra

Project Manager

EMO Energy Solutions, LLC

3141 Fairview Park Drive, Suite 450

Falls Church, VA 22042

voice 703-205-0445 ex-113

fax 703-205-0449

 

From: Seun Odukomaiya [mailto:SOdukomaiya at lacquis.com] 
Sent: Wednesday, March 31, 2010 9:15 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] SubMeters in Equest

 

Equest users,

In order to isolate my elevator energy usage for a LEED model, I created a
submeter of type electric and assigned the elevator loads to it. I then
assigned that submeter to the main electric meter. This seems to have worked
just fine. My question then is this: Which report details the energy
consumption of my submeter. I looked at the BEPS and BEPU reports, but they
have the total electric usage listed without my submeter broken out. Am I
looking at the right report? Thanks

 

 

Seun Odukomaiya, LEED AP  -  Mechanical Engineer

L'Acquis Consulting Engineers

9229 Delegates Row, Suite 550

Indianapolis, IN 46240

voice:  (317) 706-2075 Ext. 255

fax:     (317) 706-2076

email: sodukomaiya at laceindy.com

web:  www.laceindy.com <http://www.laceindy.com/> 

P Please consider the environment before printing this e-mail.

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100402/5c05d80d/attachment.htm>