[Equest-users] simulating building performance

[Clayton.E.Dumcum at jci.com]

Sara,

Sometimes the downloaded weather file is empty.  Go to your Weather/TMY2 
folder in the eQuest Data directory and delete the .bin weather file. When 
you re-run the simulation, eQuest will reload the weather file.  This 
should clear up your error.

Clayton
 



"Lars Fetzek" <lfetzek at phoenixeng.us> 
Sent by: equest-users-bounces at lists.onebuilding.org
09/15/2009 08:34 AM

To
"'Sara Ghalayini'" <sara_ghalayini at yahoo.com>, 
<equest-users at lists.onebuilding.org>
cc

Subject
Re: [Equest-users] simulating building performance






Sara,

                 Though I am not familiar with this error, in particular, 
my
suggestion for fixing it is the following, which has workwed for some 
other
errors when I didn't want to start over in the wizard:

1.  Save and close the project.  Make a backup in a separate folder, just 
in
case the rest of what I suggest fails.
2.  Start a new project and use the wizard to set the weather/geographic
location.
3.  Save and close the new project.
4.  Open the .inp file for the new project in notepad.
5.  Copy and paste the weather/geographic lines of code from this .inp 
file
to the .inp file in the original project, overwriting the corresponding 
data
there.
6.  Close the .inp files in notepad.
7.  Re-open the modified original project .inp file in eQuest.  If it 
works
out, save it under a different name/folder and delete the other projects
that have been produced by this procedure.

     Good luck!

Lars Fetzek, EI
Phoenix Engineering Group
Tamps, Florida


-----Original Message-----
From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Sara
Ghalayini
Sent: Tuesday, September 15, 2009 4:01 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] simulating building performance

hello,
i finished all the input in equest and resolved all my errors, i wanted to
simulate building performance and this is the msg that i got: ***error***
End of file read on weather file.

what does it mean? i can't go back to the first page to change the weather
file anymore.. what should i do?

thank u


 
_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG

_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to 
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090915/7b25c6a3/attachment.htm>