[Equest-users] eQUEST: Heat Recovery Chiller

[Otto Schwieterman]

Tony, have you figured out or received a step-by-step process for
simulating a heat recovery system?
 
Thanks, Otto
 
________________________________________________________________________
______
 
Tony-
 
When you define a chiller in eQuest, along with assigning the
appropriate
CHW (and possibly CW and HW) there is also a loop assignment for
"HtRec".
This takes either a HW, WLHP, or DHW Loop to which the chiller will
attempt
to provide recovered heat to.  There are some variables you will need to
fill in depending on how much heat you want to recover, etc...
 
If that doesn't answer your question, please let me know.
 
Regards,
 
-- 
Steve Mignogna
Atelier Ten
 
 
 
On Mon, Mar 9, 2009 at 4:55 PM, Tony Kriel <tkriel at sustaineng.com
<http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org>
> wrote:
 
>  I know this has been asked once or twice before, but I haven't had
too
> much luck finding an appropriate archived response.
> 
> 
> 
> Has anyone successfully modeled a heat recovery chiller in Equest that
> would reject heat to a domestic hot water loop and would like to share
a
> step by step process for simulating such a system?
> 
> 
> 
> Thanks,
> 
> 
> 
> Tony Kriel, LEED AP
> 
> Mechanical Engineer
> 
> tkriel at sustaineng.com
<http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org>

> 
> (608) 231-9664 ext. 16
> 
> 
> 
> Sustainable Engineering Group, LLC.
> 
> 431 Charmany Drive, Suite 102
> 
> Madison, WI 53719
> 
> www.sustaineng.com

 

 

 


________________________________________________________________________________________
Fanning/Howey Associates, Inc. intends to send this transmission (including any attachments) only to the
designated individual or entity.   If you received this message in error, please notify the sender by replying
to the electronic mail (if electronic) or by telephone at the number indicated on this document.
Fanning/Howey Associates, Inc. has taken reasonable precautions to ensure no viruses are present in the
electronic mail.  Fanning/Howey Associates, Inc., will not accept responsibility for any loss or damage arising
from the use of this electronic mail or attachments. Use, disclosure, dissemination, distribution, or reproduction
of this message by unintended recipients is not authorized and maybe unlawful.   Any information included in
this transmission that is not related to contracts with our authorization, verbal or written, by Fanning/Howey
Associates, Inc. may not be covered by our professional liability insurance. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091006/e6d2e538/attachment.htm>