[Equest-users] Parametric Titles

[Jason Wendel]

How would I do it in Parametric runs?  I can set it up to do the rotations for LEED, but it doesn't have the titles to distinguish between the rotations on the printout.  I noticed in the attachment that whoever did  this put Titles in as parametric components.  Does that do it?  If so, how do I do it?

-Jason

From: Brett Fero [mailto:bfero at robsonwoese.com]
Sent: Friday, November 20, 2009 11:11 AM
To: Jason Wendel
Subject: Re: [Equest-users] Parametric Titles

Jason,

I don't know that you can input the titles directly from DD mode.  I open the inp file in a word processor and paste in the following below "Title, Run Periods, Design Days, Holidays" block as seen on the first page of the file.

$ ---------------------------------------------------------

$              Title, Run Periods, Design Days, Holidays

$ ---------------------------------------------------------



TITLE

   LINE-1           = *Title 1*

   LINE-2           = *Title 2*

   LINE-3           = *Title 3*
   LINE-4           = *Title 4
..


The last two periods are important to include. You can also edit the titles in the parametric runs.

Brett Fero

On Fri, Nov 20, 2009 at 12:43 PM, Jason Wendel <jwendel at heatheng.com<mailto:jwendel at heatheng.com>> wrote:
I noticed in this attachment from an email that there is a title as a parametric component, does that put a title on the report?  If so, how do you do it?  I've tried a bunch of stuff and can't get it to work.

-Jason

________________________________________________________________________
This Email has been scanned for all viruses by PAETEC Email Scanning Services, utilizing MessageLabs proprietary SkyScan infrastructure. For more information on a proactive anti-virus service working around the clock, around the globe, visit http://www.paetec.com<http://www.paetec.com/>.
________________________________________________________________________

_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG<mailto:EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091120/33ea255d/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Building Rotation.doc
Type: application/msword
Size: 80896 bytes
Desc: Building Rotation.doc
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091120/33ea255d/attachment.doc>