[Equest-users] (no subject)

[Vikram Sami]

Kimberly,

 

You need to go into the inp file and change the location of the OA system

 

Hope this helps

 

Vikram Sami, LEED AP 
Direct Phone 404-253-1466 | Direct Fax 404-253-1366 

LORD, AECK & SARGENT ARCHITECTURE
1201 Peachtree Street NE, Suite 300, Atlanta, GA 30361 
Responsive Design · Technological Expertise · Exceptional Service 
Please visit our new website | www.lordaecksargent.com <file:///\\www.lordaecksargent.com\> 

P Think GREEN before you print.

 

 

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Kimberly Killian
Sent: Wednesday, June 17, 2009 9:29 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] (no subject)

 

Good afternoon,

 

I am trying to add a mixed air unit onto a four-pipe fan coil system through the use of a dummy zone, from which my real zones will get their outside air. I get the following error:

 

"EL1 Sys1 (FC) (G.E16) defined before its OA-FROM-SYSTEM. This will cause incorrect OA temperature calculation. Move this SYSTEM to be defined before its OA-FROM-SYSTEM in the project BDL input file."

 

The catch is that there is no BDL file, as the simulation aborts before it is complete. Is there another way to define the MAU before the Fan Coil System. I have searched a number of terms in the user's group and there are many questions related to this topic, but I can't find any answers. Any help would be appreciated.

 

Regards,

Kimberly Killian
Northern Architects, Inc.
207 King Street Suite 3
Burlington VT 05401
T: 802-658-1953
F: 802-658-2975

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090618/cf2efe80/attachment.htm>