[Equest-users] Chiller Type

[Zareh, Hassan]

Hi,
I'm modeling a high rise residential building. The proposed building has one centrifugal chiller but based on ASHRAE, the reference building should have two rotary screw chillers, but eQuest doesn't allow me to have different type of chillers in parametric run. In parametric run when I try to change the type of the chiller, the program crashes. Any comment?
 
Thanks in advance.
 
Hassan Zareh, M.Eng., P.Eng., LEED® AP
Project Engineer
Stantec Consulting Ltd.
100 - 401 Wellington Street West
Toronto ON M5V 1E7
Ph: (416) 598-7642
Fx: (416) 596-6680
hzareh at stantec.com 
stantec.com <http://www.stantec.com/>  
 
The content of this email is the confidential property of Stantec and should not be copied, modified, retransmitted, or used for any purpose except with Stantec's written authorization. If you are not the intended recipient, please delete all copies and notify us immediately.
 
ü Please consider the environment before printing this email.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090805/b0a0b7fa/attachment.htm>