[Equest-users] eQuest Program Help

[Meng Li]

Talking about having to insert all the Appendix G requirement by hand, it
would be really convenient if the newer version of eQuest would be able to
do this automatically in the same way that it inputs the T-24 codes. Perhaps
by offering an optional plug-in for LEED credits compliance purposes?

On Tue, Apr 7, 2009 at 1:56 PM, Kosuke <kosuke at cmtaegrs.com> wrote:

>  1)            The easiest way to create a building with multiple shells
> to turn on "specify exact site coordinates" under general shall information
> on DD wizard.  Keep X and Y coordinate to 0,0.  If you want to create a
> shall above another shell, just change z coordinates.
>
> 2)            Your initial model is baseline model.  If you go to energy
> efficiency measure (EEM)  wizard, you can run same energy model with
> different HVAC efficiency, building R-value, and etc.  This time, EEM run
> name will be shown on the simulation reports with your baseline model.
>
> 3)            If you want to compare the results to ASHRAE 90.1, you have
> to insert all the Appendix G requirement by hand.
>
>
>
>
>
> Kosuke Kato, LEED AP
>
> Senior Energy Modeling Engineer
>
> CMTA Consulting Engineers, Inc.
> Louisville - Lexington KY
> Lou. 502 326 3085
> Lex. 859 253 0892
> kosuke at cmtaegrs.com
> www.cmtaegrs.com
>
> We've gone green! Please verify the necessity of printing this email -
> thank you.
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 
Meng Li,  LEED AP

We take the proprietary nature of materials such as architectural drawings,
lighting layouts and HVAC specifications etc. very seriously. Under no
circumstance will we divulge any proprietary information to third party or
use it for any purpose other than energy efficiency analysis and modeling.

As well, all analysis performed upon the proprietary materials will be kept
confidential and will never be released to third party without the explicit
written permission of the materials' proprietor.


The content of this email is confidential and intended for its recipient
only.
If you have receive this message by mistake, please contact its sender,
Energy Efficient Power Holdings, Inc. Thank you.

El contenido de este email es confidencial y destinado únicamente  a su
recipiente. Si usted ha recibido este mensaje por error, por favor contacte
a su remitente, Energy Efficient Power Holdings, Inc. Gracias.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090413/a9a573cf/attachment.htm>